Mitsubishi MN Converter, G-50A manual Message Close the malfunction log display? will be displayed

Page 39

(5)Click on to end the Malfuncion Log Screen.

The message “Close the malfunction log display? ” will be displayed.

Click on to end or click on to not end.

is clicked, the Main Screen is returned.

Note: When G-50A is connected to the system, the malfunction log of OC is eliminated.

Please check the malfunction log in G-50 to check the malfunction log of OC.

3.8.2Screen Functions and Operations

(1)Click on and the Address Change Screen appear.

Click on to change the address. The unit attributes are displayed at this time.

(If there is no unit at the address given, the attributes are not given.)

Once the address has been set, click on . The units are changed.

If there is no unit at the address given, the message “Unit doesn’t exist in this address. Retry again.” will appear.

Click on to return to the Address Change Screen.

(2)Click on and the message “Clear the malfunction log. Is it OK?” will appear.

Click on to clear or click on to not clear.

(3)”Menu Bar”

The menu bar displays [File] and [Help].

-By clicking [File] and then selecting “Save as …” from the sub-menu, the Malfunction Log data will be output and saved in the CSV format. This data can not be viewed on the offline screen.

-Click on [File] and then select “Return“ from the sub-menu to end the Malfunction Log Screen and return to the Main Screen.

-Click on [Help] and an explanation about "Terminology" and "Operation Method" will be appear. [Refer to 3.6 Connecting Information 3.6.2 (2)”Menu Bar”]

*The error history being memorized by G-50 can also be monitor-displayed. (Display can not be performed when connecting with MN Converter.)

The system controllers other than G-50 can not provide the monitoring of error history.

38

Image 39

Contents Operating Manual MitsubishiIntroduction of Maintenance Tools ForewordOn-Line Monitorvia MN converter On-Line Monitorvia G-50 Case for remote connection Dialup connection modeOff-Line Monitor Wide area access modeImage of the Operation monitor mail communication mode Remote access methodRequired Operating Environment Hardware RequirementsRequired Materials Minutes InstallationSetting Up the Maintenance Tools New setup Setting up the databaseSetting up the Maintenance Tools Upgrade the Database Running Maintenance Tool UpgradeEnding the Maintenance Tool Uninstalling the Maintenance ToolRE Change of computer name on PC Uninstalling the Maintenance ToolsStarting and Ending the Application Starting the Maintenance ToolNormal mode Wide area access modeCase for remote connection Page Click on Line will be disconnected Case for local connection Starting the On-Line MonitorG-50 connectionNext Remote Monitor screen is displayed Case for remote connection DialupCase for remote connection E-mail Address book Starting the Off-Line Monitor Using the Wide area access modeOnline Connection Creating the Area name folderCreating the Customer name folder Setting the Air conditioning system name Setting screen of air conditioning systemAbove Offline Analyze Other settingMail setting of maintenance tool PC Setting of Com portEnding the Off-Line Monitor Open the Main ScreenOpen the Off-line Analyze Screen Terms for Each Section Design of ScreenOperating Method On-Line Monitor Screen Transfer On-Line Monitor Operating MethodAutomatic Search Function ChartAddress Search Method Address Search Method SelectionAutomatic Searching Manual SearchingSearching Screen will appear Main Screen Refer to 3.6 Connecting Information 3.6.2 2 Menu BarItems Performed Here Connecting InformationFunction Selection Operations Screen Transfer Operation4Momentarily, the Connecting Information Screen Screen Functions and OperationClick on Term and Explanation of Terminology Screen appear Message Monitoring! Please wait for a moment. will appear Operation MonitorMomentarily, the Operation Status Monitor Screen will appear 1Operation Buttons Screen Functions and OperationsAbout LM Adapter Introduction to the screen Tens digit Trend graph Screen function and operation Ending the graphMessage Monitoring. Please wait for a moment. will appear Malfunction LogMessage Close the malfunction log display? will be displayed Self-Diagnosis Monitoring Optional SettingRefer to 3.6 Connecting Information 3.6.2 2Menu Bar Sending CommandMonitoring of Pre-error Data Command Screen and return to the Optional Setting ScreenMain Screen Date / Time SettingScreen Functions and Operation Indoor unit, Lossnay unit Operation ControlScreen Functions and OperationBC Controller Free contact of indoor unit Starting of this functionMonitoring of contact status Termination of this function Operation of output contactTitle Screen Monitoring of Pre-error DataOff-Line Monitor Operating Method Off-Line Monitor Screen TransferFunction common for each screen Filing operation System Information MonitorOff-Line Analyzing Operation Status Monitor ScreenMonitor Screen. Refer to c Trend Graph Screen GraphPage Check mail Mail Server SettingSystem Information Monitoring of Pre-error Data 4.5.1 Off-Line Analyzing Import Function common for each screen Filing operationDelete Data ExportMonitor Data information convert Text ConvertRight-clicking menu Offline Analyze on Wide area access mode Operating Status Monitor Data Pre-error DataFile Names System Information DataHow to change setting of Firewall How to Change Setting of Firewall for Windows XPE-Mail mode and MN converter connection, it is not related II In the case of G-50 Network Remote Connection Dialup Case of Windows XP Service Pack Page Page Trouble Cause Repair Troubleshooting?Trouble When Installing or Starting Trouble with Main ScreenOperation Monitor Trouble Connecting information TroubleMalfunction Log Trouble Operation Monitor Mail Communication Mode TroubleSpecific troubles induced by E-mail connection mode Free contact of indoor unit TroubleOff-Line Monitor Trouble1 Off-Line Monitor Trouble2