1.2 Required Operating Environment
This manual refers to Windows® 2000 as Windows 2000, and Windows® XP as Windows XP.
Trademarks
MS, Microsoft, Microsoft logo, and Windows are registered trademarks and trade names of Microsoft Corporation.
Each company may use as registered trademarks and trade names the product names used in this manual.
1.2.1 Hardware Requirements
The computer must be IBM compatible on DOS/V and capable of satisfying the following requirements.
- OS | Windows2000 or WindowsXP (Recommended English version *1) |
- CPU | PentiumIII 500 MHz (Recommended 1GHz or more) |
- RAM | Minimum 128 MB (Recommended 256MB or more) |
- HDD | Available space 5 GB or more *2 |
- LCD | Display resolution:XGA(1024x768) or more |
Unit should be equipped with a pointing device, such as a mouse pointer or track ball.
*1 About OS
Fundamentally, it corresponds to OS of each country. However, separators of time and date differ in each language. This separator may affect a maintenance tool.
It recommends using it by English OS and Regional options setup, changing into English area form. Or it recommends using it, changing date separator into [/] and time separator into [:].
*2 About Hard Disk Space
The hard disk space recommended above is only the amount required for installing the maintenance application. Additional space will be required if the operating data is also to be stored on the hard disk. Accordingly, there may not be enough memory to store operating data if the maintenance system is installed in a computer with limited hard disk memory.
* NOTE
1.2.2 Required Materials
The following materials are needed for operating the Maintenance Tools :
(1) In case of routing via MN converter
MN Converter
For detail, please see Installation
(2) In case of routing via G-50
A
4