*Note
"Stop mail communication" is a function to stop the operation monitor mail transmission of
3.5 Function Selection Operations
(1) First, click on the desired [Function Selection Button].
(2)Next, click on the Unit to Operate.
(3)The screen will move to the various operation screens.
(4)If the wrong function selection button is clicked, click on that button once again and the other function selection buttons will be enabled.
3.6 Connecting Information
*Items Performed Here
-Indoor units connected to outdoor units, interlock units and the operation group SC (such as system controller and remote controller) connected to indoor units can be monitored here.
-Select and
The screen displays addresses and attributes of the units connected to the select unit.
3.6.1 Screen Transfer Operation
(1) Click on | on the Main Screen. |
(2)Click on the for the outdoor unit to be monitored. - Only outdoor units can be selected.
(3)Momentarily, the message “Monitoring! Please wait for a moment.” will appear.
* NOTE
Even with the direct expansion type, when units other than outdoor units are selected by (2), the screen returns to the Main Screen (where it waits for function selection input).
27