Bacharach H25-IR manual Specifications, CFCs, HCFCs, HFCs and Halogens

H25-IR Specifications

7 Specifications

Gases Detected	Detects and measures, depending on instrument’s part number:
	• CFCs, HCFCs, HFCs and Halogens
	R11, R12, R22, R23, R113, R114, R123, R124, R134a, R227, R236fa,
	R401A, R402A, R402A, R404A, R407A, R407C, R408A, R409A, R410A,
	R500, R502, R503, R507, R508B, H1211, H1301, H2402, N1230, FA188
	• R600a
	• SF6
	• CO2
	• R227
Detection Method	Infrared
Measurement Units	oz/yr, g/yr, mL/s, PaM3/s, ppm
Measurement Range	0.03 to 5.00 oz/yr
	0.85 to 142 g/yr
	0.08 x 10–4to 100 x 10–4mL/s
	0.08 x 10–5to 100 x 10–5PaM3/s
	0 to 1,000 ppm
Operating Modes	Search: detects presence and location of gas leaks
	Measure: calculates and displays leak rate
Response Time	0.5 to 1 second (dependent on probe-hose length)
Sensitivity	0.03 oz/yr (0.9 g/yr) all gases
Resolution	0.01 oz/yr (0.1 g/yr)
Accuracy:
Leak Rate	±1% of the accuracy value marked on tag attached to leak source
PPM	±10% of reading (can be improved to ±1% if recalibrated using a known
	concentration of refrigerant gas)
Temperature Drift	±0.8% of reading per °C
Calibration	Internal: calibration performed using the unit’s built-in leak source
	External: calibration performed using a customer supplied leak
	source of a known gas type and leak rate
Relays	Four SPDT relays (rated 3 A, 240 VAC), each programmable to energize
	under 11 different operating conditions
Audio Speaker	Audible indication of leak level
AC Power	100 to 240 VAC, 50/60 Hz
Power Consumption	15 Watts
Warm-Up Time	2 minutes (30 minutes to meet published specifications)
Operating Temperature	32 to 122 °F (0 to 50 °C)
Storage Temperature	−4 to 122 °F (−20 to 50 °C)
Ambient Humidity	5 to 90% RH, non-condensing
Dimensions	4 x 10.75 x 15.5 in.
	(101.6 x 273.1 x 393.7 mm)
Weight	18 lb (8.2 kg)

Instruction 3015-4342 51