60 | Optional Equipment (for qualified installers only) |
Floor Mounting
a | Cut a hole between floor joists | b | Attach the floor boot to the blower box with the included screws. |
for the blower box. |
| ||
|
|
| The screws |
|
|
| attach to either |
|
| of these pairs of | |
|
| holes. Use the | |
| 14" |
| upper pair for |
|
|
| thick flooring, the |
|
|
| lower pair for |
|
|
| thin flooring. |
Slide the blower into the hole c cut in step "a". Attach with four
screws.
Attach the starter ring to the fireplace following the directions below (use the most convenient side - 864TRV has only one opening on the right side).
1/4" Nutdriver
Starter Ring
Remove and discard the cover plate.
Bend the tabs on the bottom of the starter ring up to lock it in place.
Travis Industries | 4070201 |