|
| Installation (for qualified installers only) | 7 |
| |
| Packing List |
|
|
| |
| • | Propane Conversion Kit | • Wall Switch with Wire (see page 20 for details) |
|
|
| • | Log Set (9 piece) | • Firestop (sku 93006094) |
|
|
•Grate
Additional Items Required
• FIREBACKS ARE REQUIRED – See page 47. (sku 98500662, 98500663, 98500664, or 98500665)
•Direct Vent
•Gas Line Equipment (shutoff valve, pipe, etc.)
•Electrical Equipment (min. 14 gauge, grounded line)
•Grill
Installation Overview
•All requirements below must be met.
Top Vent
Configuration
See the section "Mantel Requirements"
| Drywall |
Side | 1" Min. |
Wall |
|
See "Facing
Requirements" | See "Optional Non- |
| |
| Combustible Hearth" |
| See the section |
| "Electrical Connection" |
See the section "Vent Requirements"
See the section "Approved Vent Configurations"
Insulation must not fill the 1/2" clearance around the back and sides of the fireplace.
Nailing Brackets
See the section "Minimum
Framing Dimensions"
See the section
"Gas Line Installation"
Rear Vent |
|
Configuration |
|
Required | Travis |
Firestop (sku | |
93006094) |
|
Recommended Installation Procedure
•Frame the opening for the fireplace. Make sure to allow for vent installation.
•This fireplace is designed to accommodate 1/2" or 5/8" drywall (see "Nailing Brackets" on page 14 for details). Secure the fireplace to the framing.
•Install the vent, gas line and electrical
•Install the wall switch (see page 20) or thermostat (if applicable).
•Install the drywall.
•Install the hearth (if applicable).
•Install the facing (if applicable).
•Install the mantel (if applicable).
•Finalize the installation (see page 43) and install the grill or face.
© Travis Industries | 4070201 |