R
Santa Fe Pellet Stove
F. Baffle & Brick Replacement
1.Place right brick in behind the right bracket and then slide to the left so the tabs are behind the center brick.
Figure 36.1.
2.The brick will be flush against the back wall and the braket’s notches will be exposed. Figure 36.2.
3.Pull the right edge of the brick forward and slide the brick into the notches both top and bottom of right bracket. Figure 36.3.
4.Repeat for left brick.
5.Insert baffle into top front of firebox and then raise up the bottom end and insert baffle tab into notch on the right bracket to lock into place. Figure 36.5. Place the left side hook of the bottom baffle over the top of brick for stability.
6.The baffle does not completely cover the top of the fire- box. There is an opening as shown in Figure 36.6.
Do not remove rope 
from center brick
Tabs
Figure 36.1
Brick is flush against back wall
Lift Brick, pull forward at an angle and drop down into notches
Figure 36.3
Right Brick Installed
Figure 36.4
Insert Baffle Tab into Slot
Brick in front of clip and Notches exposed
Figure 36.2
Figure 36.5
Opening at left side of Baffle
Figure 36.6
Page 36 | September 1, 2008 |