Fabric Preparation:
Put the top sides of the fabric together and sew to the end of the zipper
opening. Use the reverse to lock the stitches.
Sew the zipper opening with stitch length at "4"' and top thread tension at °'3",
Set the Machine
Stitch wtdth
control 0 or
2 3 #
Top thread tension control 2 to 6
1/8") | /Zipper | _eelh |
|
Zipper tape
End ol opemng
Top stde of fabric
Top edge of fabric
Stitch length controt 2
4
Stretch Stitch
E:Zipper toot
To attach the zipper foot:
-To sew on the left side of the zipper, attach the presser bar to the right pins on the zipper foot.
•To sew on the right side of the zipper, attach the presser bar to the left pins on the zipper foot.
To Sew:
1.Reset stitch length at 2 and top thread tension at 2 to 6.
Fold back the left seam allowance as shown.
2, Turn under the right seam allow- ance to form a 1/8" fold.
3.Place the zipper teeth next to the 1/8" fold and pin in place.
4, Attach the presser bar to the right pins on the zipper foot.
5.Lower the zipper foot on the top side at the bottom of the zipper so that the needle pierces the fold and the zipper tape.
6.Sew through the fold and the zipper tape to the point where the slider begins.
7.Lower the needle to hold the fabric and raise the presser foot.