DeLonghi not available manual Electrical Connections, Operation and USE, Maintenance

Page 4

GB

DESCRIPTION

AMode selector

BSwing button (certain models only)

CTip over switch

DBase

EThermostat

FIndicator light

GFilter protection grille

HFilter

ELECTRICAL CONNECTIONS

-Before plugging into the mains, make sure the voltage of your mains supply corresponds to the V value indicated on the appliance and that the socket and power line are appropriate for the load required.

-THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EEC ON RADIO INTERFERENCE SUPPRESSION.

INSTALLATION

The appliance can be used on any horizontal surface.

Do not overload the electrical circuit. Avoid using the same socket for other appliances.

OPERATION AND USE

1.Make sure the appliance is off before plugging into the mains

2.Plug into the mains socket.

3.Turn the appliance on by placing the thermostat (E) in the Max position and the mode

selector (A) in one of the following positions: 1/2.

-Summer mode (fan only): turn the mode selector to the position. (the light comes on).

-Operating at Min power: turn the mode selector to the "1" position.

-Operating at Max power: turn the mode selector to the "2" position.

-To turn the appliance off: turn the mode selector to the "0" position and the thermostat to the position, then unplug from the mains.

Adjusting the thermostat

When the room has reached the required temperature, turn the thermostat (E) slowly anti- clockwise until you hear a "click". The thermostat will automatically regulate the temperature set and keep it constant.

Freeze protection function

With the thermostat dial at minimum and the mode selector (A) on "2", the appliance main- tains room temperature at about 5°C, preventing freezing with minimal energy consumption.

MODELS WITH MOTORISED ROTATING BASE

A number of models have a motorised rotating base. To distribute the air flow over a larger area, press the swing button (B). The appliance swings from right to left.

To stop the appliance in the desired position, simply press the button again (B).

Models with motorised base are fitted with a tip over switch which turns the appliance off if it falls over. To restart the appliance, simply place it upright again.

MAINTENANCE

-Always unplug from the mains socket before cleaning.

4

Image 4
Contents Page Electrical Connection U.K. only Abb.1 Maintenance Electrical ConnectionsOperation and USE Models with Motorised Rotating BaseImportant Safeguards Raccordement Électrique Fonctionnement ET UtilisationModèles Dotés DE Base Tournante Motorisée EntretienMises EN Garde Elektrischer Anschluss Betrieb UND GebrauchModelle MIT MOTORISIERTEM, Schwenkbaren Sockel InstandhaltungHinweise Allacciamento Elettrico Funzionamento ED USOModelli CON Base Rotante Motorizzata ManutenzioneAvvertenze Elektrische Aansluiting Werking EN GebruikModellen MET Gemotoriseerde Roterende Basis OnderhoudWaarschuwingen Conexión Eléctrica Funcionamiento Y USOModelos CON Base Giratoria Motorizada MantenimientoAdvertencias Funcionamento E Utilização Ligação EléctricaManutenção Advertências Ηλεκτρικη Συνδεση ΕγκαταστασηΛειτουργια ΚΑΙ Χρηση Μοντελα ΜΕ Μηχανοκινητη Περιστρεφομενη ΒασηΠροειδοποιησεισ Установка Функционирование И ЭксплуатацияОбслуживание Меры ПредосторожностиElektromos Bekötés BeállításMűködés ÉS Használat Motorizált Forgó Talppal Ellátott ModellekKarbantartás FigyelmeztetésekFunkce a Používání InstalaceÚdržba Upozornění Instalowanie Działanie I U YtkowanieModele Z Ruchomą Podstawą KonserwacjaInformacje Dotyczące Bezpieczeństwa Funksjon OG Bruk Tilkopling TIL StrømnettetModeller MED Motorisert Roterende Base Vedlikehold AdvarslerElektriska Anslutningar AnvändningUnderhåll VarningarTilslutning TIL EL-NETTET Funktion OG BetjeningModeller MED MOTORSTYRET, Roterende Basis VedligeholdelseAdvarsler Toiminta JA Käyttö SähkökytkentäHuolto Varoituksia 1141004IDL/04.08