APC ACRD101, ACRD100 Using the Display Interface, Scrolling status screens, Main menu screens

Using the Display Interface

Every time power is applied to the cooling unit, the display interface initializes, causing the LEDs to cycle and the alarm-tone to activate.

Scrolling status screens

After start-up, the interface displays the firmware revision number on the display interface. The display interface then scrolls automatically and continuously through screens of status information.

Status Screen Name	Status Information Displayed
InRow RD	• On/Standby/Idle/Service
	• User Defined Name
	• User Defined Location
Group	• Alarms/No Alarms
	• Cool Output kW
	• Cool Setpoint °C (or °F)
	• Maximum Rack Temperature °C (or °F )
Unit	• Alarms/No Alarms
	• Cool Output kW
	• Air Flow l/s (liters per second) or CFM (cubic feet per minute)
	• Rack Inlet °C (or °F)

Press the up or down arrow key to interrupt the automatic scrolling and view a specific status screen. From a main menu screen, press ESC to return to the scrolling status screens.

Main menu screens

On any top-level status screen, press the ENTER or ESC key to open the first main menu screen.

Note: Once a period of inactivity - at the display interface - exceeds the Password Timeout setting, the display interface returns to the scrolling status screens.

For information on setting the time-out duration, see “Timeout” on page 23.

All main menu choices are displayed on a series of six main menu screens.

On/Standby

View Alarms

Clear Alarms

View Event Log

Clear Event Log

Configure Modbus

Set Date & Time

Set Password

Set Display Units

Configure Display

Configure Network

About InRow RD

Set Identification

Service Intervals

View Run Hours

Configure Unit

Configure Group

Set Group Setpoint

Set	Group PID
Set	Unit Threshlds
View Unit Status		na1636d
View Group Status

InRow RD 10 kW Air Cooled Operation and Maintenance 13