APC ACRD101, ACRD100 manual Password and time-out, Date and time

Display Settings

Set display interface settings including the time and date, units of measure, passwords, and time-out settings. You can also adjust the contrast, key click, beeper volume, and beep-on-alarm settings.

Password and time-out

Path: Main > Set Password

Note: The default user password is apc (lowercase). See “Password entry” on page 15 for information on passwords.

Change passwords. Set the Admin and Device passwords.

1.Move the selector arrow next to the Change Passwords option and press the ENTER key.

2.Select the password to change (either Admin or Device).

3.Enter a new password (up to 8 characters).

4.Press the ENTER key to confirm.

Timeout. Set the length of time which can elapse when no keys are pressed before the display interface returns to the scrolling screen status. The password must then be entered to regain access.

Invalidate Now. Override the password timeout and require password entry immediately.

Date and time

Path: Main > Set Date & Time

Set the time. Enter the correct time, and press the ENTER key. The Time setting is displayed on some status screens and is also used in the alarm/event log to time-stamp events.

Set the date. Enter the day, month, and year, and press the ENTER key. The Date setting is displayed on some status screens and is also used in the alarm/event log to date-stamp events.

Set the format. Use the up or down arrow key to select the date Format setting.

•mm/dd/yyyy (11/16/2007) (Default)

•yyyy-mm-dd (2007-11-16)

•dd-mmm-yy (16-Nov-07)

•mmm-dd-yy (Nov-16-07)

•dd.mm.yyyy (16.11.2007)

InRow RD 10 kW Air Cooled Operation and Maintenance 23