INSTALLATION
Framing and Finishing
1.Choose unit location.
2.Frame in fireplace with a header across the top. It is important to allow for finished face when setting the depth of the frame.
3.Attach fireplace to frame using adjustable frame. Preset depth to suit facing material (adjustable to 1/2", 5/8" or 3/4" depths).
4.Use (8) 1/2"
Vent Pipe Clearance
Note: Maintain one inch (1") of clearance around vertical vent pipe. See Fig. 9A. For horizontal vent, maintain a minimum 1" clearance to the bottom and sides of the vent, and 3" clearance to combustibles above the vent pipe. See Fig. 9B
Figure 8
VENT PIPE
Top of Vent
3"(76 mm)
1"(25 mm)
Figure 9B
Combustibles NOT allowed in shaded area
5” Diameter flue
8” Diameter intake vent
1" (25 mm)
1" MINIMUM CLEARANCE AROUND VENT PIPE
Figure 9A
Page 10 |