Bradford-White Corp MITW -12 / -15, MITW -10 manual Instructions for

Page 1

Instructions for:

TTW 1 Universal Service

Replacement Blower Kit

P/N 265-47200-00

(To be performed ONLY by qualified service providers)

The Blowers on the Following Water

Heaters are Serviced by This Kit:

MITW -10	MITW -12 / -15	M1TW Series
Series	Series	(Normal & High Altitude)

(For full model numbers, see page 2.)

Manual 47216A Save this manual for future reference

Image 1

Contents Instructions for Model Numbers Reference Kit Components Tools Required Bradford White TTW1 Universal Service Replacement Blower Step Remove the screws, qty , that secure Inside the access compartment, follow Just below the crimp connector, cut Plug both the blower Check all safety devices to make sure they Unplug the water heater from wall outlet Mitw -12 / -15 Series Place template on top of water heater in correct orientation TTW1 Universal Service Replacement Blower Secure Cover Screws Blower screws TTW1 Universal Service Replacement Blower Do not over tighten 2 screws attaching Tighten 2 screws on junction Box to secure cover Operation could occur if these devices are not M1TW60T*FCX TTW1 Universal Service Replacement Blower TTW1 Universal Service Replacement Blower Secure Cover screws Boot back Place Secure 3 blower screws Step If the new adapter is used, remove the old