Bradford-White Corp MITW -10, MITW -12 / -15 manual Tools Required

Page 4

Tools Required

¼" Nut Driver 5/16" Nut Driver Slotted Screwdriver Philips Screwdriver Hammer

1/8" Drill Bit Drill

Channel Lock Pliers

Needle Nose Pliers

Tape (preferably scotch or masking) PVC Primer / Cement

Wire Cutters

Wire Strippers Wire Brush Hacksaw

Page 4

Image 4

Contents Instructions for Model Numbers Reference Kit Components Tools Required Bradford White TTW1 Universal Service Replacement Blower Step Remove the screws, qty , that secure Inside the access compartment, follow Just below the crimp connector, cut Plug both the blower Check all safety devices to make sure they Unplug the water heater from wall outlet Mitw -12 / -15 Series Place template on top of water heater in correct orientation TTW1 Universal Service Replacement Blower Secure Cover Screws Blower screws TTW1 Universal Service Replacement Blower Do not over tighten 2 screws attaching Tighten 2 screws on junction Box to secure cover Operation could occur if these devices are not M1TW60T*FCX TTW1 Universal Service Replacement Blower TTW1 Universal Service Replacement Blower Secure Cover screws Boot back Place Secure 3 blower screws Step If the new adapter is used, remove the old