Bradford-White Corp MITW -12 / -15, MITW -10 manual Bradford White

Page 5

Bradford White

TTW 1 Universal Service

Replacement Blower Kit

P/N 265-47200-00

	Table of Contents
			Page
Kit Components				3
Tools Required			4
MITW -10 Series Water Heaters:			6
MITW40LLN10, MITW40LCX10, MITW50L*LN10,
MITW50L*CX10
MITW -12 / -15 Series Water Heaters:			12

MITW40L*EN12, MITW40L*BN12, MITW40L*CX12,

MITW50L*EN12, MITW50L*BN12, MITW50L*CX12,

MITW40L*EN15, MITW40L*BN15, MITW40L*CX15,

MITW50L*EN15, MITW50L*BN15, MITW50L*CX15

M1TW Series Water Heaters:

21

M1TW40S*BN, M1TW40S*CX, M1TW50S*BN,

M1TW50S*CX, M1TW40S*FBN, M1TW40S*FCX,

M1TW50S*FBN, M1TW50S*FCX, M1TW60T*FBN,

M1TW60T*FCX

Notes

27

	(*) Denotes Warranty Years (Typically “5”, “6”, or “10”)

Notice:	To determine what series water heater is being serviced, please refer to the
	model numbers shown below each series title. Then, turn to the applicable
	page for the correct water heater series.

	Page 5

Image 5

Contents Instructions for Model Numbers Reference Kit Components Tools Required Bradford White TTW1 Universal Service Replacement Blower Step Remove the screws, qty , that secure Inside the access compartment, follow Just below the crimp connector, cut Plug both the blower Check all safety devices to make sure they Unplug the water heater from wall outlet Mitw -12 / -15 Series Place template on top of water heater in correct orientation TTW1 Universal Service Replacement Blower Secure Cover Screws Blower screws TTW1 Universal Service Replacement Blower Do not over tighten 2 screws attaching Tighten 2 screws on junction Box to secure cover Operation could occur if these devices are not M1TW60T*FCX TTW1 Universal Service Replacement Blower TTW1 Universal Service Replacement Blower Secure Cover screws Boot back Place Secure 3 blower screws Step If the new adapter is used, remove the old