Bradford-White Corp MITW -10, MITW -12 / -15 manual Model Numbers Reference

Page 2

Model Numbers Reference

Water Heater Model Numbers Serviced by This Kit

			Water Heater			Original Blower’s P/N
	Model Numbers					Original Blower’s P/N
	Model Numbers

MITW-10 Series	MITW40L*LN10
	MITW40L*CX10					239-39785-00
	MITW50L*LN10


	MITW50L*CX10

	MITW40L*EN12
	MITW40L*BN12
	MITW40L*CX12					239-41605-00
Series	MITW50L*EN12					239-41605-00
	MITW50L*EN12
	MITW50L*BN12
-15	MITW50L*CX12
-15
-12 /
-12 /	MITW40L*EN15
MITW	MITW40L*EN15
	MITW40L*BN15
	MITW40L*CX15					239-41605-00
	MITW50L*EN15					239-41605-00
	MITW50L*EN15
	MITW50L*BN15
	MITW50L*CX15

		M1TW40S*BN				239-45584-00
		M1TW40S*CX				239-45584-00
		M1TW50S*BN					243-45987-00 (Hi-Alt)
Series		M1TW50S*CX

	M1TW40S*FBN
M1TW	M1TW40S*FBN
M1TW	M1TW40S*FCX					239-45584-00
	M1TW40S*FCX
	M1TW50S*FBN
	M1TW50S*FCX						243-45987-00 (Hi-Alt)
	M1TW60T*FBN
	M1TW60T*FCX

(*) Denotes Warranty Years (Typically “5”, “6”, or “10”)

Page 2

Image 2

Contents Instructions for Model Numbers Reference Kit Components Tools Required Bradford White TTW1 Universal Service Replacement Blower Step Remove the screws, qty , that secure Inside the access compartment, follow Just below the crimp connector, cut Plug both the blower Check all safety devices to make sure they Unplug the water heater from wall outlet Mitw -12 / -15 Series Place template on top of water heater in correct orientation TTW1 Universal Service Replacement Blower Secure Cover Screws Blower screws TTW1 Universal Service Replacement Blower Do not over tighten 2 screws attaching Tighten 2 screws on junction Box to secure cover Operation could occur if these devices are not M1TW60T*FCX TTW1 Universal Service Replacement Blower TTW1 Universal Service Replacement Blower Secure Cover screws Boot back Place Secure 3 blower screws Step If the new adapter is used, remove the old