Huawei HG612FTTC VDSL NTE manual Indicators, Interfaces and Buttons, Color, Status, Description

	EchoLife HG612 FTTC VDSL NTE
2 Product Overview	User Guide

2.2.2 Indicators

Table 2-1describes the indicators on the HG612.

Table 2-1Indicators on the HG612

Indicator	Color	Status	Description
POWER	Green	On	The HG612 is powered on.
	Green	Blinking	The HG612 is booting (to be confirmed if all
			more LEDs blink).
	-	Off	The HG612 is powered off, or the power module
			is faulty.
DSL	Green	On	The HG612 is activated.
	Green	Blinking	The HG612 is performing line training.
	-	Off	No VDSL connection exists, or the VDSL
			connection is disconnected.
LAN1	Green	On	The Ethernet connection is set up, but no data is
			being transmitted.
	Green	Blinking	The Ethernet connection is set up, and data is
			being transmitted.
	-	Off	The Ethernet connection is disconnected.
LAN2	Green	On	The Ethernet connection is set up on the LAN2
			interface.
			In this case, you need to disconnect the Ethernet
			connection on the LAN2 interface, and then set
			up an Ethernet connection on the LAN1
			interface.
	-	Off	No Ethernet connection is set up on the LAN2
			interface.
Note
LED = light-emitting diode

2.2.3 Interfaces and Buttons

	Table 2-2describes the interfaces and buttons on the HG612.
	Table 2-2Interfaces and buttons on the HG612
	Interface or Button	Description
	DSL	This interface is used to connect to the MODEM interface on
		a splitter.
2-2	Huawei Proprietary and Confidential		Issue 01 (2009-05-15)
	Copyright © Huawei Technologies Co., Ltd