EchoLife HG612 FTTC VDSL NTE |
|
User Guide | 3 Getting Started |
10.Select Enable for DHCP spoofing as required.
11.Select the authentication mode provided by the ISP.
12.Select a dialing method, and then click Submit. Step 3 Set LAN parameters.
1.In the navigation tree, choose Basic > LAN.
2.Set the IP address and subnet mask of the LAN connection.
3.Select Enable for DHCP server, and then set the corresponding parameters.
4.Click Submit.
3.5.4Configuring the PTM Bridge
Step 1 Set PTM parameters.
1. In the navigation tree, choose Basic > PTM.
2. Set DSL latency to Path0 or Path1.
3. Set PTM priority to Normal Priority or High Priority.
4. Click Submit. Step 2 Set WAN parameters.
1.In the navigation tree, choose Basic > WAN.
2.Select a PVC from the Layer2 interface
Note
The name of this PVC should begin with ptm.
3.Select Enable for WAN connection.
4.Select a service from the Service list
5.Set Port binding to LAN1 or LAN2.
6.Select Bridge from the Connection mode
7.Select PPPoE_ Bridged or IP_ Bridged from the Bridge type
8.Select Enable for DHCP transparent transmission, WAN802.1q, WAN802.1p, LAN802.1q, or LAN802.1p as required.
9.Click Submit.
Step 3 Set LAN parameters.
1.In the navigation tree, choose Basic > LAN.
2.Set the IP address and subnet mask of the LAN connection.
3.Click Submit.
Issue 01 | Huawei Proprietary and Confidential | ||
Copyright © Huawei Technologies Co., Ltd | |||
|
|