Huawei HG612FTTC VDSL NTE manual Diagnosis, Function, Path, Parameter, Description

EchoLife HG612 FTTC VDSL NTE
User Guide		6 Maintenance
	Parameter	Description
	Software Upgrade	To upload the selected upgrade file, click this button. The
		system uses the specified upgrade file to upgrade the
		firmware of the HG612.

Table 6-5 describes multicast-upgrade parameters.

Table 6-5Multicast-upgrade parameters

Parameter	Description
Multicast upgrade	It specifies whether to enable the multicast upgrade.
Multicast IP address	It specifies the IP address used for the multicast upgrade.
Multicast port number	It specifies the port number used for the multicast upgrade.

Table 6-6 describes BT agent parameters.

Table 6-6BT agent parameters

Parameter	Description
Active	To enable the BT agent function, click this button.
Deactive	To disable the BT agent function, click this button.
TPS file name	It specifies the TPS file name.
Browse	To find the TPS file, click this button to display a dialog box.
	In this dialog box, find the TPS file.
Upload TPS File	To upload the selected TPS file, click this button.

Note

BT = British Telecom

6.3 Diagnosis

Function

Through the diagnosis function, you can check whether the HG612 is connected to the LAN, the DSL, or the Internet.

The fault management function is only used for the VDSL PTM mode.

Path

Choose Maintenance > Diagnose.

Issue 01 (2009-05-15)	Huawei Proprietary and Confidential	6-3
	Copyright © Huawei Technologies Co., Ltd