Huawei HG612FTTC VDSL NTE manual Configuring the ATM Route-Static, Configuring the ATM Route-PPPoE

EchoLife HG612 FTTC VDSL NTE

User Guide3 Getting Started

3.4.3 Configuring the ATM Route–Static

Step 1 Configure the ATM PVC.

1. In the navigation tree, choose Basic > ATM.

2. Enter VPI/VCI provided by the ISP.

3. Set DSL link type to EoA.

4. Click Submit. Step 2 Set WAN parameters.

1.In the navigation tree, choose Basic > WAN.

2.Select a PVC from the Layer2 interface drop-down list box.

Note

zThe name of this PVC should begin with atm.

zThe DSL link type of this ATM PVC should be EoA.

3.Select Enable for WAN connection.

4.Select a service from the Service list drop-down list box.

5.Set Port binding to LAN1 or LAN2.

6.Select Route from the Connection mode drop-down list box.

7.Set Connection type to Static.

8.Select Enable for WAN802.1q, WAN802.1p, LAN802.1q, LAN802.1p, or NAT as required.

9.Set the IP address and subnet mask of the WAN connection.

10.Click Submit.

Step 3 Set LAN parameters.

1.In the navigation tree, choose Basic > LAN.

2.Set the IP address and subnet mask of the LAN connection.

3.Select Enable for DHCP server, and then set the corresponding parameters.

4.Click Submit.

3.4.4Configuring the ATM Route–PPPoE

Step 1 Configure the ATM PVC.

1.In the navigation tree, choose Basic > ATM.

2.Enter VPI/VCI provided by the ISP.

3.Set DSL link type to EoA.

4.Click Submit.

Step 2 Set WAN parameters.

1.In the navigation tree, choose Basic > WAN.

2.Select a PVC from the Layer2 interface drop-down list box.

Issue 01 (2009-05-15)	Huawei Proprietary and Confidential	3-5
	Copyright © Huawei Technologies Co., Ltd