Huawei HG612FTTC VDSL NTE manual Path, Parameter Description, Choose Advanced QoS

EchoLife HG612 FTTC VDSL NTE
User Guide	5 Parameter Settings

Multiple QoS methods are used to provide different priorities to different services or data flows to ensure that high-priority data is processed at first priority.

Different applications provided by the HG612 impose different QoS requirements. To meet these QoS requirements, the HG612 may resort to service classification to provide the required QoS through DiffServ. The HG612 sets an independent queue for each priority and uses a strict priority or the weighted round robin (WRR) mechanism to control the output of each priority queue.

Only the HG612 with the routing software supports the QoS function.

Path

Choose Advanced > QoS.

Parameter Description

Table 5-14describes QoS parameters.

Table 5-14QoS parameters

Parameter	Description
Enable	It specifies whether to enable the QoS function.
BandWidth	It specifies the bandwidth of the QoS.
QueueType	It specifies the queue type of the QoS.

Table 5-15describes classification parameters.

Table 5-15Classification parameters

Parameter	Description
Rule name	It specifies the rule name.
Classification	It specifies whether to enable the classification function.
SET1	In SET1, you can set certain parameters, such as Source
	MAC, Dest MAC, Source IP, and Source IP Mask.
	Multiple rules can be used simultaneously. If multiple rules
	are used, all the rules must be met so that the classification
	can take effect.
SET2	It specifies the IEEE 802.1p traffic classification rule.

Issue 01 (2009-05-15)	Huawei Proprietary and Confidential	5-13
	Copyright © Huawei Technologies Co., Ltd