Huawei HG612FTTC VDSL NTE Configuring the UPnP, Configuring the LED, Function, Path, Parameter

Page 46
5.13 Configuring the UPnP

 

EchoLife HG612 FTTC VDSL NTE

5 Parameter Settings

User Guide

5.13 Configuring the UPnP

Function

The universal plug and play (UPnP) function supports plug-and-play and automatic discovery for multiple types of network equipment. If the UPnP function is enabled, a device that supports the UPnP function can access networks, obtain an IP address, transmit performance data, detect other devices, and learn the performance data of the other devices.

Path

Choose Advanced > UPnP.

Parameter Description

Table 5-18describes UPnP parameters.

Table 5-18UPnP parameters

Parameter

Description

UPnP

It specifies whether to enable the UPnP function on the

 

HG612.

5.14 Configuring the LED

Function

The HG612 can control whether to turn on the LEDs.

Path

Choose Advanced > LED.

Parameter Description

Table 5-19describes LED parameters.

Table 5-19LED parameters

Parameter

Description

LED active

It specifies whether to turn on the LEDs.

 

If the LED active is cleared, it indicates that the LEDs are

 

turned off.

5-16

Huawei Proprietary and Confidential

Issue 01 (2009-05-15)

Copyright © Huawei Technologies Co., Ltd

 

 

Image 46
Contents User Guide EchoLife HG612 FTTC VDSL NTEEchoLife HG612 FTTC VDSL NTE V100R001 terminal@huawei.comTrademarks and Permissions NO WARRANTYImport and Export Regulations EchoLife HG612 FTTC VDSL NTE ContentsIssue 01 User GuideA Technical Specifications 7 FAQs6 Maintenance B Default SettingsFigures FiguresPage 5-11 Tables5-10 5-12User Guide 5-16Tables EchoLife HG612 FTTC VDSL NTERelated Versions About This DocumentPurpose Intended AudienceSymbol ConventionsSymbol Conventions DescriptionConvention Command ConventionsGeneral Conventions BoldfaceMouse Operations GUI ConventionsKeyboard Operations FolderEnvironmental Requirements 1 Safety PrecautionsBasic Requirements Operation RequirementsCleaning Requirements Environmental Protection2.2 Hardware Structure 2.1 Product Features2 Product Overview 2.2.1 AppearanceIndicator 2.2.2 Indicators2.2.3 Interfaces and Buttons ColorInterface or Button 3.2 Powering on the HG612 3.1 Connecting the Cables3 Getting Started 3.3 Logging In to the Web-Based Configuration Utility Requirement3. Select Enable for WAN connection 3.4 ATM Mode Configuration3.4.1 Configuring the ATM Route-PPPoA 6. Select Enable for NAT as required3. Set DSL link type to EoA 3.4.2 Configuring the ATM Route-DHCP7. Set Connection type to DHCP 3.4.3 Configuring the ATM Route-Static 3.4.4 Configuring the ATM Route-PPPoE3.4.5 Configuring the ATM Bridge 7. Set Connection type to PPPoE3.5.2 Configuring the PTM Route-Static 3.5 PTM Mode Configuration3.5.1 Configuring the PTM Route-DHCP 2. Set DSL latency to Path0 or Path13.5.3 Configuring the PTM Route-PPPoE 7. Set Connection type to Static3.5.4 Configuring the PTM Bridge 4.2 Checking xTM Information 4 Checking the Status4.1 Checking Device Information Function4.3 Checking WAN Information 4.4 Checking LAN InformationParameter 5.2 Configuring the ATM 5 Parameter Settings5.1 Configuring the DSL z G.Dmtz LLC z VCMUXParameter 5.4 Configuring the WAN 5.3 Configuring the PTMz Normal Priority z High Priority Choose Basic WAN Static PPPoE 5.5 Configuring the LANAuto Parameter through Default gateway 5.6 Configuring the Routing FunctionChoose Advanced Routing 5.8 Configuring the NAT 5.7 Configuring the FirewallChoose Advanced Firewall z UDP Choose Advanced NATz TCP z TCP/UDP5.10 Configuring the QoS 5.9 Configuring the IGMPChoose Advanced IGMP Choose Advanced QoS MAC , Dest MAC , Source IP , and Source IP MaskChoose Advanced SNTP 5.11 Configuring the SNTP5.12 Configuring the CWMP Choose Advanced CWMPParameter Choose Advanced UPnP 5.13 Configuring the UPnP5.14 Configuring the LED Choose Advanced LED6.2 Device Management 6 Maintenance6.1 Account Management Choose Maintenance AccountChoose Maintenance Device 6.3 Diagnosis Choose Maintenance Diagnose6.4 Log Management Choose Maintenance LogDescription 7 FAQs A Technical Specifications SpecificationDefault Value B Default SettingsB Default Settings Broadband Access Server C Acronyms and AbbreviationsAutomatic Configuration Server Content Distribution NetworkIGMP Media Access ControlQuality of Service Internet Group Management ProtocolTransfer Control Protocol SNTPSimple Network Time Protocol Unspecified Bit RatePeoples Republic of China Huawei Industrial Base Bantian, Longgang ShenzhenPart Number