EchoLife HG612 FTTC VDSL NTE |
|
User Guide | 3 Getting Started |
Step 2 Enter http://192.168.1.1 in the address bar of the Internet Explorer, and then press
Enter.
Step 3 In the Login dialog box, enter the user name and the password, and then click OK. By default, both the user name and the password are admin.
By default, the IP address of the LAN interface of the HG612 is 192.168.1.1. You can change this IP address.
After changing the IP address, ensure that the IP address of the computer is in the same network segment as that of the IP address of the LAN interface of the HG612 so that the computer can access the
3.4 ATM Mode Configuration
3.4.1 Configuring the ATM Route–PPPoA
Step 1 Configure the ATM PVC.
1. In the navigation tree, choose Basic > ATM.
2. Enter VPI/VCI provided by the ISP.
3. Set DSL link type to PPPoA.
4. Click Submit. Step 2 Set WAN parameters.
1.In the navigation tree, choose Basic > WAN.
2.Select a PVC from the Layer2 interface
Note
zThe name of this PVC should begin with atm.
zThe DSL link type of this ATM PVC should be PPPoA.
3.Select Enable for WAN connection.
4.Select a service from the Service list
5.Set Port binding to LAN1 or LAN2.
6.Select Enable for NAT as required.
7.Enter the user name and password provided by the ISP.
8.Select Enable for DHCP spoofing as required.
9.Select the authentication mode provided by the ISP.
10.Select a dialing method, and then click Submit.
Step 3 Set LAN parameters.
1.In the navigation tree, choose Basic > LAN.
2.Set the IP address and subnet mask of the HG612.
3.Select Enable for DHCP server, and then set the corresponding parameters.
Issue 01 | Huawei Proprietary and Confidential | ||
Copyright © Huawei Technologies Co., Ltd | |||
|
|