Huawei HG612FTTC VDSL NTE manual Parameter, Description, Static

		EchoLife HG612 FTTC VDSL NTE
5 Parameter Settings		User Guide
	Parameter	Description
	Connection type	You can select one of the following options:
		z DHCP: If this option is selected, the HG612 obtains its IP
		address used for the WAN connection from the DHCP
		server of the service provider.
		z Static: If this option is selected, the HG612 uses the static
		IP address provided by the service provider for the WAN
		connection. You need to enter the IP address, subnet mask,
		default gateway, and DNS name provided by the service
		provider.
		z PPPoE: If this option is selected, the HG612 uses the
		PPPoE mode for the WAN connection, that is, the HG612
		uses the embedded PPPoE dial-up software for dialing.
		You can choose the dialing method as required.
	WAN802.1q,	They specify whether to enable the WAN802.1q,
	WAN802.1p,	WAN802.1p, LAN802.1q, and LAN802.1p.
	LAN802.1q, and
	LAN802.1p
	NAT	It specifies whether to enable the NAT function.
		If the NAT function is enabled, the HG612 maps the internal
		IP addresses of the LAN to the ports that correspond to the
		WAN IP addresses of the PVC.
		If the NAT function is disabled, the HG612 cannot use the
		functions related to the NAT and the computer connected
		with the HG612 may be unable to access the Internet.
		You are recommended to set this parameter to Enable.
	Submit	To save the settings, click this button.
	Note
	z DNS = Domain Name Server
	z NAPT = Network address and Port Translation

Table 5-5describes protocol parameters.

Table 5-5Protocol parameters

Parameter	Description
IP Address	This parameter is valid when Connection type is set to
	Static.
	It specifies the WAN IP address of the PVC.
Subnet Mask	This parameter is valid when Connection type is set to
	Static.
	It specifies the WAN subnet mask of the PVC.

5-6	Huawei Proprietary and Confidential	Issue 01 (2009-05-15)
	Copyright © Huawei Technologies Co., Ltd