Huawei HG612FTTC VDSL NTE manual Path, Parameter Description

Page 30
Manual background

EchoLife HG612 FTTC VDSL NTE

 

User Guide

4 Checking the Status

You can check the interface and connection information of the LAN.

Path

Choose Status > LAN.

Parameter Description

Table 4-4describes network information.

Table 4-4Network information

Parameter

Description

IP address

It indicates the IP address of the Ethernet interface on the

 

HG612.

MAC address

It indicates the MAC address of the Ethernet interface on the

 

HG612.

Table 4-5describes Ethernet information.

Table 4-5Ethernet information

Parameter

Description

Link Status

It indicates the connection status on the LAN interfaces.

 

z Connected: A connection is set up on the LAN interface.

 

z Disconnected: No connection is set up on the LAN

 

interface.

Max bitRate

It indicates the maximum bit rate of the LAN.

 

 

Duplex mode

It indicates the duplex mode of the Ethernet interface on the

 

HG612.

Issue 01 (2009-05-15)

Huawei Proprietary and Confidential

4-3

Copyright © Huawei Technologies Co., Ltd

 

 

Image 30
Contents User Guide EchoLife HG612 FTTC VDSL NTEEchoLife HG612 FTTC VDSL NTE V100R001 terminal@huawei.comNO WARRANTY Trademarks and PermissionsImport and Export Regulations EchoLife HG612 FTTC VDSL NTE ContentsIssue 01 User GuideA Technical Specifications 7 FAQs6 Maintenance B Default SettingsFigures FiguresPage 5-11 Tables5-10 5-12User Guide 5-16Tables EchoLife HG612 FTTC VDSL NTERelated Versions About This DocumentPurpose Intended AudienceSymbol ConventionsSymbol Conventions DescriptionConvention Command ConventionsGeneral Conventions BoldfaceMouse Operations GUI ConventionsKeyboard Operations FolderEnvironmental Requirements 1 Safety PrecautionsBasic Requirements Operation RequirementsCleaning Requirements Environmental Protection2.2 Hardware Structure 2.1 Product Features2 Product Overview 2.2.1 AppearanceIndicator 2.2.2 Indicators2.2.3 Interfaces and Buttons ColorInterface or Button 3.1 Connecting the Cables 3.2 Powering on the HG6123 Getting Started 3.3 Logging In to the Web-Based Configuration Utility Requirement3. Select Enable for WAN connection 3.4 ATM Mode Configuration3.4.1 Configuring the ATM Route-PPPoA 6. Select Enable for NAT as required3.4.2 Configuring the ATM Route-DHCP 3. Set DSL link type to EoA7. Set Connection type to DHCP 3.4.3 Configuring the ATM Route-Static 3.4.4 Configuring the ATM Route-PPPoE3.4.5 Configuring the ATM Bridge 7. Set Connection type to PPPoE3.5.2 Configuring the PTM Route-Static 3.5 PTM Mode Configuration3.5.1 Configuring the PTM Route-DHCP 2. Set DSL latency to Path0 or Path13.5.3 Configuring the PTM Route-PPPoE 7. Set Connection type to Static3.5.4 Configuring the PTM Bridge 4.2 Checking xTM Information 4 Checking the Status4.1 Checking Device Information Function4.3 Checking WAN Information 4.4 Checking LAN InformationParameter 5.2 Configuring the ATM 5 Parameter Settings5.1 Configuring the DSL z G.Dmtz LLC z VCMUXParameter 5.3 Configuring the PTM 5.4 Configuring the WANz Normal Priority z High Priority Choose Basic WAN Static 5.5 Configuring the LAN PPPoEAuto Parameter 5.6 Configuring the Routing Function through Default gatewayChoose Advanced Routing 5.7 Configuring the Firewall 5.8 Configuring the NATChoose Advanced Firewall z UDP Choose Advanced NATz TCP z TCP/UDP5.9 Configuring the IGMP 5.10 Configuring the QoSChoose Advanced IGMP Choose Advanced QoS MAC , Dest MAC , Source IP , and Source IP MaskChoose Advanced SNTP 5.11 Configuring the SNTP5.12 Configuring the CWMP Choose Advanced CWMPParameter Choose Advanced UPnP 5.13 Configuring the UPnP5.14 Configuring the LED Choose Advanced LED6.2 Device Management 6 Maintenance6.1 Account Management Choose Maintenance AccountChoose Maintenance Device 6.3 Diagnosis Choose Maintenance Diagnose6.4 Log Management Choose Maintenance LogDescription 7 FAQs A Technical Specifications SpecificationB Default Settings Default ValueB Default Settings Broadband Access Server C Acronyms and AbbreviationsAutomatic Configuration Server Content Distribution NetworkIGMP Media Access ControlQuality of Service Internet Group Management ProtocolTransfer Control Protocol SNTPSimple Network Time Protocol Unspecified Bit RateHuawei Industrial Base Bantian, Longgang Shenzhen Peoples Republic of ChinaPart Number