Huawei HG612FTTC VDSL NTE manual Path, Parameter Description, z LLC, z VCMUX

	EchoLife HG612 FTTC VDSL NTE
5 Parameter Settings	User Guide

You can set ATM parameters as required.

Path

Choose Basic > ATM.

Parameter Description

Table 5-2 describes ATM parameters.

Table 5-2ATM parameters

Parameter	Description
VPI/VCI	It specifies the VPI of the selected PVC. To enable the HG612 to
	communicate with the upper-layer equipment, ensure that this VPI
	is the same as the VPI set on the upper-layer equipment.
DSL latency	It specifies the DSL latency for the HG612.
DSL link type	You can select either of the following two options:
	z EoA: The EoA includes the bridge, PPPoE and IPoE modes of
	the ATM.
	z PPPoA: If this option is selected, the HG612 is used as a router.
	The HG612 uses the embedded PPP dial-up software to set up
	dial-up connections, and encapsulates data packets in PPPoA
	mode.
Encapsulation	You can select either of the following two options:
mode	z LLC
	z VCMUX

5-2	Huawei Proprietary and Confidential	Issue 01 (2009-05-15)
	Copyright © Huawei Technologies Co., Ltd