Brother PQ1300 Basic Sewing, Pin Feeding for hard-to-handle fabrics, Pin Feeding Unit

Page 17

Basic Sewing (1)

Basic Sewing

Before sewing.

Begin sewing.

Finish

Sewing.

✽When changing sewing directions.

Reinforcement stitches

1cm

1cm

CONTENTS
Accessories
Parts	Names
	of
Begin	Before You

1 Lift foot, pull about 15cm of upper	2	Lower foot.
and bobbin thread under and behind	3	While needle is pierced all the way

foot, and position fabric under foot.	through fabric, step gently on foot
	through fabric, step gently on foot
	controller.

Pin Feeding (for hard-to-handle fabrics)

4Raise needle to highest position.

5Lift foot, remove fabric and cut thread.

✽When using thread trimmer:

4Push thread trimmer button (this will cause the upper and bobbin threads to be cut automatically and the needle to stop in a raised position.)

5Lift presser foot and remove fabric.

	1	Make sure needle is pierced all the	✽ At the beginning of a seam, sew a
		way through fabric.	few stitches with the hand wheel, hit
	2	Lift presser foot, and turn fabric using	the reverse stitch button and sew a
	2	Lift presser foot, and turn fabric using	few stitches back to reinforce your
		needle as an axis.	few stitches back to reinforce your
		needle as an axis.	seam, then go back to normal sewing
	3	Lower foot and continue sewing.	seam, then go back to normal sewing
	3	Lower foot and continue sewing.	and finish the seam. Do the same at
			and finish the seam. Do the same at

the end of a seam.

Pin Feeding Unit

Light Bulb	Needles and	Changing
	Threading
Needle Chart	Samples and	Stitch

Fabric:

Velvet

Synthetic Suede

Others

Indicator Needle

N

Feed Pin

Fabric

Feed Pin	Feed Dog

Presser Feet	Changing
Sewing	Basic
Caring for Your Machine

✽ The above fabrics	1 Move feed adjustment knob	2 Adjust pressure adjust-	3 Gently pull thread until feed pin
can be sewed	to pin feeding position.	ment dial until indicator	catches fabric and sew.
neatly by sewing		needle is in the right posi-
by pin feeding.		tion.

The feed pin passes up through all layers of fabric moving with the feed dog's motion to feed all layers of the fabric evenly.

✽Feed pin is automatically lowered when presser foot is raised.

Shooting

Trouble

13

Image 17

Contents PQ1300 Important Safety Instructions For safe operation For a longer service lifeFor repair or adjustment Contents Part Name Part Code AccessoriesNames of Parts Before You Begin Pressure Adjustment Dial Setting up the knee controlPresser Foot Lift Lever Knee LiftFoot Pressure and Feed Dog Position Light SwitchIndicator Lamp Needle Stop Position Button Changing the Feed Pin Changing Needles and Light BulbRemove screwdriver Re-attach needle plate, needle and presser footSpool Cushion Spool Cap Spool of Thread ThreadingPut spool of thread on spool pin Wound threadBobbin Insertion 812Threader Using the Automatic Needle ThreaderPin Make sure thread take-up leverTurn once to pull out the bobbin Thread How to Pull Out the Bobbin ThreadStitch Samples Thread Tension Stitch Samples and Needle ChartLower presser foot Raise needle to highest point126 Changing Presser FeetChanging Sewing Feet Zipper Foot Presser FeetBasic Sewing Basic SewingPin Feeding for hard-to-handle fabrics Pin Feeding UnitRolled Hem Foot 148Mark Zipper FootSew zipper onto fabric along Lining 1620Invisible Zipper Foot Caring for Your Machine Keep Your Sewing Machine CleanPrecautions 1822 Trouble ShootingPleasetake YournearestMemo Précautions d’utilisation 204Pour une vie prolongée de votre machine Pour la réparation et le réglageAvant de commencer Accessoires Enfilage Nom des piècesPoints dessai et tableau daiguilles Changement du pied-de- biche226 AccessoiresNo. de pièce Désignation Code de pièce RemarqueTable dextension Nom des piècesPages 24 et Au genou248 Avant de commencerSélecteur de tension VolantSélecteur de réglage de pression Levier du pied-de-bicheBouton de ciseaux 2630Pression du pied-de-biche et position Des griffes dentraînementRemonter la tête et Retirer le tournevisTournevis Ampoule de lampe Remonter la plaque à aiguille et le pied-de- biche2832 EnfilageCoussinet de bobine Capuchon de bobine Bobine de fil Appuyer sur la butée de canetteEncoche à fil La pédaleVolet de canette Torsadé, faire passer Utilisation de lenfileur automatiqueSi le fil est encore Comment sortir le fil de la canette Points dessai Tension des fils Points dessai et tableau daiguilles326 Changement du pied-de-biche pied pour fermeture à glissière Changement du pied-de-bichePermet de fixer des fermetures à glissière dissimulées Peut également être utilisé avec un entraînement par ergotCouture de base Couture de basePied pour ourlet rouleauté Pied pour fermeture à glissière 3640Arrêt P o s i t i o n d u p i e d s o n t correctement alignéesDents DoublureFaufile Coudre 2 ou 3 points de renfortPrécautions Entretien de la machine à coudre3842 Des points sautent DépannageSi lon ne parvient pas à magasin où elle a étéachetée 29-31English French Off before servicing. Replace cover Part Function Pressure Adjustment DialPour régler la longueur des points Remplissage de la canettePièces Fonction