Caring for Your Machine
Note
Make sure power is off before cleaning sewing machine.
1Turn machine off.
2Remove foot.
3Remove needle plate.
4Clean out dust and thread scraps.
✽Thread scraps can be swept out through the bobbin door.
5When the area under the needle
plate is cleaned out, oil hook of b o b b i n c a s e w i t h s e w i n g machine oil.
6 Attach needle plate and foot.
Hook 
■Keep Your Sewing Machine Clean
Please use a soft, dry cloth to wipe off light dirt and dust. If sewing machine is very dirty, wipe with a cloth
soaked in warm water, or in warm water containing a neutral detergent. Then wipe off any detergent residue, and wipe off water with a dry cloth.
■ Precautions
Please keep sewing machine away from heat sources such as irons and space heaters. Do not use chemicals like benzine or thinner to clean your machine. When machine is not in use, please keep machine out of direct sunlight.
Item | Specification |
| Item | Specification | ||
Sewing Speed | 1,300 stitches per minute | Height of feed dog | 0.7mm 1.1mm | |||
(maximum) | Height of | 3mm – 3.5mm | ||||
|
|
| ||||
Stitch Length | 0 – 7mm |
| lower needle | |||
|
| |||||
(pitch) |
| Needles that | HLX5#9 – #16 | |||
|
|
| ||||
Stroke of | 34.1mm |
| may be used | SCHMETZ 130/705H #65 – #100 | ||
Needle |
| Bed dimensions | 439mmX178mm | |||
|
|
| ||||
Stroke of |
|
|
| Total weight | 10kg | |
Thread Take- | 61.4mm |
| Motor | 120V 60Hz | ||
Up Lever |
|
|
| Sewing Light | 120V 15W 60Hz | |
| Foot Lift | One | 6mm | Sewing area | 595mmX285mm | |
Foot Height | Two | 9mm |
|
| ||
|
|
| ||||
| Knee control | Over 10mm |
|
| ||
|
|
|
|
|
| |
CONTENTS | |
Accessories | |
Parts | Names |
| of |
Begin | Before You |
Light Bulb | Needles and | Changing | |
| Threading |
| |
Needle Chart | Samples and | Stitch | |
Presser Feet | Changing | ||
Sewing | Basic | ||
Machine | Your | Caring for | |
Shooting | Trouble | ||
17