Argosy Research H-125 Series owner manual 342 GAL, Diagnostics, Reset Diagnostic Values Hold

Step 1D

DAYS SINCE REGEN

2 Step 2D

DAY


SINCE LAST REGEN	Step 3D
342GAL


DIAGNOSTICS

=  Up Arrow	=  Down Arrow
Reset Diagnostic Values: Hold		NEXT/DOWN buttons for 3 seconds, then hold
UP/DOWN buttons for 3 seconds.

STEP 1D – Press  or  simultaneously for three seconds. If screen in step 2D does not appear in 5 seconds the lock on the valve is activated.

STEP 2D – Days, since last regeneration: This display shows the days since the last regeneration occurred. Press the NEXT button to go to Step 3D. Press REGEN to exit Diagnostics.

STEP 3D – Volume, since last regeneration: This display shows gallons of water that has been treated since the last regeneration. This display will equal zero if a water meter is not installed. Press the NEXT button to go to Step 4D. Press RE- GEN to return to previous step.

RESERVE HISTORY	Step 4D
DAY 0 160GAL


USAGE HISTORY		Step 5D
DAY1	108 GAL
	

MAX FLOW	Step 6D
DAY 6	12.7 GAL
	

RETURN TO NORMAL MODE

STEP 4D – Volume of reserve capacity used for last 7 days: If the unit is set up as a softener, a meter is installed and Set Volume Capacity is set to "Auto", this dis- play shows 0 day (for today) and the reserve capacity. Pressing the  button will show day 1 (which would be yesterday) and displays the reserve capacity. Press- ing the  button again will show day 2 (the day before yesterday) and the reserve capacity. Keep pressing the  button to show the capacity for days 3, 4, 5 and 6. The  button can be pressed to move backwards in the day series. Press NEXT button at any time to go to Step 5D. Press REGEN to return to previous step.

STEP 5D – Volume of water used, 63-day usage history: This display shows day 0 (for today) and 1 (for yesterday) will show day 2 (which would be the day before yesterday) and flashes the volume of water treated on that day. Continue to press the  button to show the volume of water treated for the last 63 days. If a regen- eration occurred on the day the "letter R" will also be displayed. This display will show dashes if a water meter is not installed. Press the NEXT button at any time to go to Step 6 D. Press REGEN to return to the previous step.

STEP 6D – Flow rate, maximum of each of last seven days: The maximum flow rate in gallons per minute that occurred in each of the last seven days will be displayed. Press  arrow to display maximum flow rate today = 0, yesterday = 1. This display will equal zero if a water meter is not installed. Press the NEXT button to exit Diagnostics. Press REGEN to return to the previous step.

To reset diagnostic data push "Next" and  button until TYPE appears in window, then press " & " button simultaneously for 3 seconds.

13