H125 Specifications

		H125	H125	H125	H125	H125	H125	H125
Model #		32-10	48	64	96	128	160	192
Factory Regeneration
Settings
Backwash	Minutes	8	8	8	8	8	8	8
	Gallons	18	18	34	34	42	60	60
Brine/Rinse	Minutes	60	60	68	68	68	68	68
	Gallons	19.2	22.2	43.5	47.7	71.1	89.1	113
Backwash	Minutes	8	8	8	8	8	8	8
	Gallons	18	18	34	34	42	60	60
Fast Rinse	Minutes	4	4	4	4	4	4	4
	Gallons	9	9	17	17	21	30	30
Fill	Minutes	6:32	9:53	13:14	19:56	26:38	33:20	40:02
	Gallons	3.2	4.7	6.5	9.8	13.2	16.6	20
Total Regeneration Gallons*		66	71	134	142	190	256	283
* Calculations are based on factory medium salt setting @ 50 psi

Refill LBS of salt		Lbs.	Lbs.	Lbs.	Lbs.	Lbs.	Lbs.	Lbs.
Low Salt		6	9	12	18	24	30	36
Medium Salt		10	15	20	30	40	50	60
High Salt		15	22.5	30	45	60	75	90

Capacity		Grains	Grains	Grains	Grains	Grains	Grains	Grains
Low Salt		19,000	28,500	38,000	57,000	76,000	95,000	114,000
Medium Salt		28,000	42,000	56,000	84,000	112,000	140,000	168,000
High Salt		32,000	48,000	64,000	96,000	128,000	160,000	192,000

Service Flow Rates		GPM	GPM	GPM	GPM	GPM	GPM	GPM
Continuous @ 15 psi		22	19	25	24	25	27	26
Peak @ 25 psi		31	28	34	33	34	35	34

Flint Under bed (lbs.)		14	14	40	40	45	50	75
High Capacity Resin (cu.ft.)		1	1.5	2	3	4	5	6
Resin Tank Size		10x44	10x54	13x54	14x65	16x65	18x65	18x65
Recommended Brine Tank		18x40	18x40	18x40	18x40	24x41	24x50	24x50
Brine Line Size		3/8”	3/8"	3/8"	3/8"	3/8"	1/2"	1/2"
DLFC (gpm)		2.2	2.2	4.2	4.2	5.3	7.5	7.5
BLFC (gpm)		0.5	0.5	0.5	0.5	0.5	0.5	0.5
Injector Size		D-Red	E-White	G-Yellow	H-Green	I-Orange	J- Lt. Blue	K- Lt. Green
Injector Draw Rate @ 50 psi		0.22	0.27	0.46	0.46	0.6	0.7	0.7
Injector Slow Rinse @ 50 psi		0.32	0.37	0.64	0.71	1.1	1.4	1.8

H125 SPECIFICATIONS