Installation fitting assemblies

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-V3151	Nut 1” Quick Connect	2
2	15-V3150	Split Ring	2
3	15-V3105	O-Ring 215	2
4	15-V3164	Fitting 1” Plastic Male NPT	2
1-4	15-V3007-04	Fitting 1” Male NPT Asy. (Set of 2)	1

Figure 22

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-V3151	Nut 1” Quick Connect	2
2	15-V3150	Split Ring	2
3	15-V3105	O-Ring 215	2
4	15-V3188	Fitting 1” Brass Sweat	2
1-4	15-V3007-02	Fitting 1” Brass Sweat Asy (Set of 2)	1

Figure 24

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-V3151	Nut 1” Quick Connect	2
2	15-V3150	Split Ring	2
3	15-V3105	O-Ring 215	2
4	15-V3149	Fitting 1” PVC Male NPT Elb.	2
1-4	15-V3007	Fitting 1” PVC Male NPT Asy. (Set of 2)	1
Figure 26

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-V3151	Nut 1” Quick Connect	2
2	15-V3150	Split Ring	2
3	15-V3105	O-Ring 215	2
4	15-V3317	Fitting 1-1/4” Plastic Male NPT	2
1-4	15-V3007-05	Fitting 1-1/4” Male NPT (Set of 2)	1

Figure 23

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-V3151	Nut 1” Quick Connect	2
2	15-V3150	Split Ring	2
3	15-V3105	O-Ring 215	2
4	15-V3188-01	Fitting 3/4” Brass Sweat	2
1-4	15-V3007-03	Fitting 3/4” Brass Sweat Asy (Set of 2)	1
Figure 25

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-V3151	Nut 1” Quick Connect	2
2	15-V3150	Split Ring	2
3	15-V3105	O-Ring 215	2
4	15-V3189	Fitting 3/4” & 1” PVC Solv. 90	2
1-4	15-V3007-01	Fitting 3/4” & 1” PVC Solv 90 (set of 2)	1

Figure 27

The nuts and caps are designed to be unscrewed or tightened by hand or with the special plastic wrench. If necessary a pliers can be used to unscrew the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or caps. Do not place screwdriver in slots on caps and/or tap with a hammer.

Do not use pipe dope or other sealants on threads. Teflon tape must be used on threads of the 1” NPT connection and on the threads for the drain line connection. Teflon tape is not necessary on the nut connection nor caps because of o-ring seals.