Argosy Research H-125 Series owner manual Drain line 3/4

drain line - 3/4”

ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-H4615	Elbow Locking Clip	1		￿
2	15-PKP10TS8	Polytube Insert, 5/8”	Option			￿
				￿
3	15-V3192	Nut 3/4” Drain Elbow	Option			￿
4-6	15-V3158-01	Drain Elbow 3/4” Male Assy	1
5	15-V3163	O-ring 019	1			￿
6	15-V3159-01	DLFC Retainer Assy.	1		￿	￿
7	15-V3162-007	DLFC 0.7 gpm for 3/4”	1
	15-V3162-010	DLFC 1.0 gpm for 3/4”
	15-V3162-013	DLFC 1.3 gpm for 3/4”	One
	15-V3162-017	DLFC 1.7 gpm for 3/4”	DLFC
	15-V3162-022	DLFC 2.2 gpm for 3/4”	must
	15-V3162-027	DLFC 2.7 gpm for 3/4”	be used
	15-V3162-032	DLFC 3.2 gpm for 3/4”	if 3/4
	15-V3162-042	DLFC 4.2 gpm for 3/4”	fitting
	15-V3162-053	DLFC 5.3 gpm for 3/4”	is used
	15-V3162-065	DLFC 6.5 gpm for 3/4”
	15-V3162-075	DLFC 7.5 gpm for 3/4”

Systems are shipped without 3/4” nut for drain elbow (polytube instal- lation only) and 5/8” polytube insert (polytube installation only).

See System Specifications DLFC on page 32, for correct DLFC size for your unit.

Figure 18

			drain line - 1”
ITEM NO.	ORDER NO.	DESCRIPTION	QTY.
1	15-H4615	Elbow Locking Clip	1
2-8	15-V3008-02	Drain Ftg, 1” Straight Assy.	1
3*	15-V3166	Drain Ftg Body, 1”	1
4*	15-V3167	Drain Ftg Adapter, 1”	1
5*	15-V3163	O-ring 019	1
6*	15-V3150	Split Ring	1
7*	15-V3151	Nut, 1” QC	1
8*	15-V3105	O-ring 215	1
9	15-V3190-090	DLFC 9.0 gpm for 1”
	15-V3190-100	DLFC10.0 gpm for 1”	One
	15-V3190-110	DLFC 11.0 gpm for 1”	DLFC
	15-V3190-130	DLFC 13.0 gpm for 1”	must be
	15-V3190-150	DLFC 15.0 gpm for 1”	used if		￿
	15-V3190-170	DLFC 17.0 gpm for 1”	1” fitting
	15-V3190-200	DLFC 20.0 gpm for 1”	is used
	15-V3190-250	DLFC 25.0 gpm for 1”
See System Specifications DLFC on page 32, for correct DLFC size for
your unit.
The nuts and caps are designed to be unscrewed or tightened by hand or
with the special plastic wrench. If necessary a pliers can be used to un-
screw the nut or cap. Do not use a pipe wrench to tighten or loosen nuts or				Figure 19
caps. Do not place screwdriver in slots on caps and/or tap with a hammer.					￿

Do not use pipe dope or other sealants on threads. Teflon tape must be used on threads of the 1” NPT connection and on the threads for the drain line connection. Teflon tape is not necessary on the nut connection nor caps because of o-ring seals.

￿

￿

￿

￿

￿

￿

￿

26