Briggs & Stratton 073000 manuel dutilisation Safety Rules

Page 4

SAFETY RULES

WARNING

Running engines produce heat. Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot surfaces and avoid hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 ft. (152 cm) clearance on all sides of water pump including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

WARNING

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

•NEVER place hands or body parts inside of running pump or hoses.

•DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

•Tie up long hair and remove jewelry.

CAUTION

Excessively high operating speeds increase risk of injury and damage to water pump.

Excessively low speeds impose a heavy load.

•DO NOT tamper with governed speed.

•DO NOT modify water pump in any way.

•DO NOT allow unqualified persons or children to operate or service water pump.

CAUTION

Improper treatment of water pump can damage it and shorten its life.

•Be sure pump chamber is filled with water before starting the engine. NEVER run pump without priming.

•Use a non-collapsible hose on the suction side of pump.

•Use water pump only for intended uses.

•If you have questions about intended use, ask dealer or call 1-800-743-4115.

•Pumping sea water, beverages, acids, chemical solutions, or any other liquid that promotes corrosion can damage the pump.

•Ensure all connections are air tight.

•DO NOT obstruct the suction or discharge hose in any way.

•NEVER operate pump without strainer basket connected to end of suction hose.

•DO NOT exceed suction head maximum of 7 m (23 ft.) and total head of 35 m (115 ft.). Use shortest suction head possible (see page 8).

•NEVER allow vehicles to drive over hoses. If a hose must be positioned across a roadway, use planking on each side of hose to allow vehicles to pass over without obstructing or collapsing hose.

•Anchor pump to avoid “walking” or equipment movement, especially if located near a ditch or edge of open ravine. The equipment could fall in.

•Keep equipment away from edge of river or lake where it could cause the bank to collapse.

•DO NOT insert any objects through cooling slots.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 073000 Call Helpline Appelez Ligne dassistance Llame Línea DirectaSafety Rules Table of ContentsEquipment Description When Adjusting or Making Repairs to Your Water Pump When Testing for Engine SparkWhen Adding or Draining Fuel When Starting EquipmentSafety Rules Know Your Water Pump Assembly Carton ContentsUnpack Water Pump Add Engine OilConnect Suction Hose Type of FuelHigh-altitude use Connect Suction Hose to PumpDischarge Hose Assembly Garden Hose Discharge AssemblyConnect Discharge Hose Optional Connect Suction Hose to Strainer BasketUsing the Water Pump What is Head?Safe Operating Considerations Move Water Pump to Safe Operating LocationPrime the Water Pump Locate Strainer Basket Into Water SourceStarting the Water Pump Primer BulbStopping the Water Pump Drain and Flush Water PumpProduct Specifications Power RatingsEngine Technical Information ModelMaintenance Schedule MaintenanceCleaning General RecommendationsOil Oil RecommendationsChecking Oil Level Adding Engine OilChanging Engine Oil Drain OilService Spark Plug Service Air CleanerTo service the air cleaner, follow these steps Storage Long Term Storage InstructionsProtect Fuel System Water PumpTroubleshooting Problem Cause CorrectionPage Emissions Control System Warranty Owner’s Warranty ResponsibilitiesEmissions Information Warranty Period Limited WarrantyTable DES Matières Description DE LéquipementMise EN Garde Règles DE SécuritéLors DU Réglage OU DES Réparations DE Votre Pompe À EAU Lors DE Tests Dallumage DU MoteurLors DE Lajout OU DE LA Vidange DU Carburant Lors DU Démarrage DE LéquipementAvertissement Connaître Votre Pompe À EAU Assemblage Déballage de la pompe à eauContenu de la boîte Ajout de lhuile à moteurFixation du boyau daspiration Type d’essenceUtilisation à hautes altitudes Branchement du boyau daspiration à la pompeBranchement du boyau dévacuation facultatif Fixation du boyau daspiration au panier-filtreBoyau d’évacuation de 2,5 cm 1 po Montage du tuyau d’arrosage d’évacuationDéplacement de la pompe vers un emplacement sécuritaire Utilisation DE LA Pompe À EAU AvertissementPour un fonctionnement sécuritaire Dégagements et mouvement de lairAmorçage de la pompe à eau Localisation du panier-filtre dans la source deauDémarrage de la pompe à eau Pompe d’amorçageArrêt de la pompe à eau Vidange et rinçage de la pompe à eauCaractéristiques DU Produit Puissance nominaleModèle Caractéristiques de la pompe à eauRecommandations générales Calendrier DentretienContrôle des émissions EntretienRecommandations relatives à l’huile HuileVérification du niveau d’huile Ajout d’huileChangement d’huile Lors DU Réglage OU DES Réparations DE Votre Pompe À EAUEntretien de la bougie dallumage Entretien du filtre à airPour faire lentretien du filtre à air, procédez comme suit Entreposage Directives dentreposage à long termePompe à eau Autres conseils dentreposageProblèm Cause Solution DépannageRemarques Garantie DU Dispositif Antipollution Renseignements sur les émissions Période DE Garantie Garantie LimitéeÍndice Descripción DEL EquipoPrecaución Normas DE SeguridadCuando Ajuste O Repare LA Bomba DE Agua Cuando Pruebe LA Bujía DEL MotorCuando Añada Combustible O Vacíe EL Depósito Cuando Ponga EN Funcionamiento EL EquipoAdvertencia Conozca SU Bomba DE Agua Montaje Desembalaje de la bomba de aguaContenido de la caja Añadir aceite del motorFijación de la manguera de aspiración Tipo de combustibleUso en grandes altitudes Conexión de la manguera de aspiración a la bombaConexión de la manguera de descarga opcional Conexión de la manguera a la cesta del filtroManguera de descarga de Descarga con manguera de riegoUSO DE LA Bomba DE Agua Advertencia Consideraciones para un uso seguroColocación de la bomba de agua en una posición segura Espacio libre y circulación de aireCebado de la bomba de agua Colocación de la cesta del filtro en la fuente de aguaPuesta en marcha de la bomba de agua ChokeParada de la bomba de agua Vaciado y limpieza de la bomba de aguaInformación Técnica Sobre EL Motor Especificaciones DEL ProductoPotencia nominal ModeloPlan DE Mantenimiento Recomendaciones generalesControl de emisiones MantenimientoAceite Recomendaciones sobre el aceiteComprobación del nivel de aceite Adición de aceite del motorCambio del aceite del motor Cuando Ajuste O Repare LA Bomba DE AguaRevisión de la bujía Revisión del filtro de airePara revisar el filtro de aire, siga estos pasos Almacenamiento Instrucciones de almacenamiento a largo plazoProteja el Sistema de Combustible Bomba de aguaResolución DE Problemas Problema Motivo SoluciónNotas Notas Garantía DEL Sistema DE Control DE Emisiones Información sobre emisiones Garantía Limitada

073000 specifications

The Briggs & Stratton 073000 is a powerful and versatile small engine that caters to a wide range of outdoor applications, including lawn mowers, pressure washers, and various garden tools. Known for its reliability and efficiency, this engine has become a trusted choice for DIY enthusiasts and professional landscapers alike.

One of the primary features of the Briggs & Stratton 073000 is its durable construction. Designed with robust materials, the engine can withstand the rigors of outdoor use, ensuring a long service life. The design includes a heavy-duty crankshaft and cast-iron cylinder sleeve, which contribute to its excellent performance and reduced wear over time.

Power output is a key characteristic of the 073000, providing ample torque to tackle tough tasks. The engine typically delivers around 6.75 to 7.25 foot-pounds of torque, making it suitable for various applications without compromising on performance. Moreover, its compact size allows for easy installation and adaptability to different types of equipment.

Another significant aspect of the Briggs & Stratton 073000 is its innovative technologies aimed at enhancing efficiency and user experience. The engine features an advanced air filtration system, which helps keep the internal components clean and reduces maintenance intervals. This ensures that the engine operates at peak performance for longer periods.

Starting the engine is made easy with the inclusion of a reliable recoil start mechanism. This system is designed for smooth operation, allowing users to start the engine effortlessly, even in challenging conditions. Additionally, the engine’s low oil shutdown technology helps protect it from damage by automatically shutting off when the oil level is low.

Another appealing characteristic is the engine's sound level. Briggs & Stratton has engineered the 073000 to operate quietly, significantly reducing noise pollution during operation. This feature is particularly advantageous for residential areas where noise restrictions may apply.

Overall, the Briggs & Stratton 073000 combines power, efficiency, and durability in a compact package. With features geared towards optimum performance and ease of use, this engine is an excellent choice for anyone looking to power their outdoor equipment reliably. Its reputation for quality and performance continues to make it a popular option among consumers and professionals alike.
Top Page Image Contents