Safety Rules

Briggs & Stratton 073004 WP15-225 manuel dutilisation Safety Rules

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•DO NOT touch hot surfaces and avoid hot exhaust gases.

•Allow equipment to cool before touching.

•Keep at least 5 ft. (152 cm) clearance on all sides of water pump including overhead.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

WARNING

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

•NEVER place hands or body parts inside of running pump or hoses.

•DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

•Tie up long hair and remove jewelry.

CAUTION

Excessively high operating speeds increase risk of injury and damage to water pump.

Excessively low speeds impose a heavy load.

•DO NOT tamper with governed speed.

•DO NOT modify water pump in any way.

•DO NOT allow unqualified persons or children to operate or service water pump.

CAUTION

Improper treatment of water pump can damage it and shorten its life.

•Be sure pump chamber is filled with water before starting the engine. NEVER run pump without priming.

•Use a non-collapsible hose on the suction side of pump.

•Use water pump only for intended uses.

•If you have questions about intended use, ask dealer or call 1-800-743-4115.

•Pumping sea water, beverages, acids, chemical solutions, or any other liquid that promotes corrosion can damage the pump.

•Ensure all connections are air tight.

•DO NOT obstruct the suction or discharge hose in any way.

•NEVER operate pump without strainer basket connected to end of suction hose.

•DO NOT exceed suction head maximum of 8m (25 ft.) and total head of 69m (225 ft.). Use shortest suction head possible (see page 10).

•NEVER allow vehicles to drive over hoses. If a hose must be positioned across a roadway, use planking on each side of hose to allow vehicles to pass over without obstructing or collapsing hose.

•Anchor pump to avoid “walking” or equipment movement, especially if located near a ditch or edge of open ravine.The equipment could fall in.

•Keep equipment away from edge of river or lake where it could cause the bank to collapse.

•DO NOT insert any objects through cooling slots.

073004 WP15-225 specifications

The Briggs & Stratton 073004 WP15-225 is a powerful and efficient water pump designed to tackle a variety of dewatering tasks. Engineered with durability and performance in mind, this pump is ideal for homeowners, contractors, and outdoor enthusiasts looking for a reliable solution for managing water removal from puddles, flooded basements, or construction sites.

At the heart of the WP15-225 is a robust 225cc Briggs & Stratton engine that generates ample power to move large volumes of water quickly. With a pumping capacity of up to 3,000 gallons per hour, it can handle substantial dewatering projects with ease. The engine is designed for easy starting, thanks to the reliable recoil start system, ensuring that users can get to work without delays.

One of the standout features of the WP15-225 is its cast iron volute and impeller, which provide superior durability and resistance to corrosion. This construction not only extends the lifespan of the pump but also enhances its efficiency during operation. The pump is capable of lifting water from depths of up to 25 feet, making it an effective solution for a range of applications.

The WP15-225 also includes a user-friendly design with ergonomic handles for easy transportation, coupled with a lightweight frame that makes it convenient to move around job sites. The integrated transport kit allows users to maneuver the pump effortlessly, delivering convenience on the go.

Furthermore, the pump features a durable, large-capacity fuel tank that ensures extended operation between refueling, minimizing downtime for the user. Its adjustable discharge feature allows for versatile operation, accommodating different discharge hose sizes and lengths, which is particularly useful for varying project requirements.

Safety features are not overlooked; the pump includes a low-oil shutdown mechanism that protects the engine from damage, ensuring longevity and reliable performance. The design has been tailored to minimize vibration, resulting in reduced user fatigue during extended use.

In summary, the Briggs & Stratton 073004 WP15-225 is a reliable, high-performing water pump that combines powerful engineering with user-friendly features. With its robust construction, efficient pumping capability, and thoughtful design elements, it stands out as a top choice for anyone in need of an effective solution for water management tasks. Whether it's for residential or commercial use, the WP15-225 is built to meet the demands of any dewatering challenge.