Briggs & Stratton 073004 WP15-225 Assembly, Unpack Water Pump, Carton Contents, Add Engine Oil

Page 6

ASSEMBLY

ASSEMBLY

Your water pump requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.

If you have any questions with the assembly of your water pump, please call the helpline at 1-800-743-4115. If calling for assistance, please have the model, revision, and serial number from the serial number label available. See “Know Your Water Pump” section for serial number label location.

Unpack Water Pump

1.Remove everything from carton except water pump.

2.Open carton completely by cutting each carton corner from top to bottom.

Carton Contents

Items in the carton include:

•Water pump

•Oil bottle

•Parts bag (which includes the following):

•This operator’s manual

•Strainer basket and barb

•Hose clamp (3)

If any of the above parts are missing or damaged, call the helpline at 1–800–743–4115.

Add Engine Oil

CAUTION! Any attempt to crank or start the engine before it has been properly serviced with the recommended oil may result in an engine failure.

1.Place water pump on a flat, level surface.

2.Clean area around oil fill and remove yellow oil fill cap.

3.Using oil funnel (optional), slowly pour entire contents of provided oil bottle (18 oz.) into oil fill opening.

4.Replace oil fill cap and fully tighten.

NOTE: See the section “Oil” on page 14 to review oil recommendations.

Add Fuel

NOTE: This gasoline engine is certified to operate on

gasoline. Exhaust Emission Control System: EM (Engine Modifications).

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

•Turn water pump OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

1.Use clean, fresh, regular unleaded fuel with a minimum of 85 octane. DO NOT use fuel which contains Methanol. DO NOT mix oil with fuel. DO NOT use fuel that contains more than 15% alcohol.

2.Clean area around fuel fill cap, remove fuel cap.

3.Slowly add regular unleaded fuel to fuel tank. Fill to red fuel level indicator (Figure 1). Be careful not to overfill.

Figure 1 - Add Fuel to Indicator

Fuel Level

Indicator

4.Install fuel cap and wait for any spilled fuel to evaporate.

CAUTION! Some fuels, called oxygenated or reformulated fuel, are fuels blended with alcohols or ethers. Excessive amounts of these blends can damage the fuel system or cause performance problems. If any undesirable operating symptoms occur, use fuel with a lower percentage of alcohol or ether.

Fresh fuel prevents gum from forming in the fuel system or on essential carburetor parts. Purchase fuel in quantity that can be used in 30 days.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Table of Contents Safety RulesEquipment Description Unintentional sparking can result in fire or electric shock Operate water pump only outdoorsSafety Rules Engine Information not shown Stamped on valve Engine Speed Lever Used to adjust engine speed toKnow Your Water Pump Strainer Basket not shown Used to limit passageUnpack Water Pump AssemblyCarton Contents Add Engine OilAttach Suction Hose to Pump Attach Suction HoseAttach Discharge Hose Attach Suction Hose to Strainer BasketSafe Operating Considerations Using the Water PumpWhat is Head? Move Water Pump to Safe Operating LocationPrime the Water Pump Locate Strainer Basket Into Water SourceStarting the Water Pump Choke Lever shown in Choke positionStopping the Water Pump Drain and Flush Water PumpEngine Technical Information Product SpecificationsPower Ratings ModelCleaning Maintenance ScheduleMaintenance General RecommendationsChecking Oil Level OilOil Recommendations Adding Engine OilTo service the air cleaner, follow these steps Service Spark PlugService Air Cleaner Oil Fill OpeningClean Spark Arrester Screen Air Cooling SystemWater Pump StorageLong Term Storage Instructions Other Storage TipsTroubleshooting Problem Cause CorrectionPage Emissions Control System Warranty Owner’s Warranty ResponsibilitiesPage Page Limited Warranty Mise EN Garde Table DES MatièresDescription DE Léquipement Règles DE SécuritéLors DU Réglage OU DES Réparations DE Votre Pompe À EAU Avertissement Connaître Votre Pompe À EAU Orifices dévacuationÉtiquette du numéro de série Contenu de la boîte AssemblageDéballage de la pompe à eau Ajout de lhuile à moteurFixation du boyau daspiration à la pompe Fixation du boyau daspirationFixation du boyau dévacuation Fixation du boyau daspiration au panier-filtrePour un fonctionnement sécuritaire Déplacement de la pompe vers un emplacement sécuritaireUtilisation DE LA Pompe À EAU Avertissement Quest-ce que la hauteur?Amorçage de la pompe à eau Localisation du panier-filtre dans la source deauDémarrage de la pompe à eau Poussez linterrupteur ON/OFF sur On FigureLinterrupteur est illustré en position On Arrêt de la pompe à eau Vidange et rinçage de la pompe à eauPuissance nominale Renseignements Techniques SUR LE MoteurCaractéristiques DU Produit ModèleContrôle des émissions Recommandations généralesCalendrier Dentretien EntretienVérification du niveau dhuile Recommandations relatives à l’huileHuile Ajout d’huileCartouche Base Entretien du filtre à airEntretien de la bougie dallumage CouvercleNettoyage de lécran pare-étincelles Système de refroidissement à airPompe à eau EntreposageDirectives dentreposage à long terme Autres conseils dentreposageProblèm Cause Solution DépannageGarantie DU Dispositif Antipollution Page Garantie Limitée Precaución ÍndiceDescripción DEL Equipo Normas DE SeguridadCuando Pruebe LA Bujía DEL Motor Quemaduras severas pueden ocurrir al hacer contacto Conozca SU Bomba DE Agua Depósito de combustibleContenido de la caja MontajeDesembalaje de la bomba de agua Añadir aceite del motor Añadir combustibleConexión de la manguera de aspiración a la bomba Fijación de la manguera de aspiraciónConexión de la manguera de descarga Conexión de la manguera a la cesta del filtroColocación de la bomba de agua en una posición segura USO DE LA Bomba DE Agua AdvertenciaConsideraciones para un uso seguro Espacio libre y circulación de aireCebado de la bomba de agua Colocación de la cesta del filtro en la fuente de aguaVuelva a colocar el tapón de la bomba Estrangular Puesta en marcha de la bomba de aguaRápido FuncionamientoParada de la bomba de agua Vaciado y limpieza de la bomba de aguaPotencia nominal Información Técnica Sobre EL MotorEspecificaciones DEL Producto ModeloControl de emisiones Plan DE MantenimientoRecomendaciones generales MantenimientoComprobación del nivel de aceite AceiteRecomendaciones sobre el aceite Adición de aceite del motorRevisión del filtro de aire Revisión de la bujíaPara revisar el filtro de aire, siga estos pasos Limpieza de la pantalla apagachispas Sistema de refrigeración de aireBomba de agua AlmacenamientoInstrucciones de almacenamiento a largo plazo Otras sugerencias para el almacenamientoResolución DE Problemas Problema Motivo SoluciónNotas Garantía DEL Sistema DE Control DE Emisiones = 250 horas, B = 500 horas y a = 1000 horas Uso del consumidor Uso comercial

073004 WP15-225 specifications

The Briggs & Stratton 073004 WP15-225 is a powerful and efficient water pump designed to tackle a variety of dewatering tasks. Engineered with durability and performance in mind, this pump is ideal for homeowners, contractors, and outdoor enthusiasts looking for a reliable solution for managing water removal from puddles, flooded basements, or construction sites.

At the heart of the WP15-225 is a robust 225cc Briggs & Stratton engine that generates ample power to move large volumes of water quickly. With a pumping capacity of up to 3,000 gallons per hour, it can handle substantial dewatering projects with ease. The engine is designed for easy starting, thanks to the reliable recoil start system, ensuring that users can get to work without delays.

One of the standout features of the WP15-225 is its cast iron volute and impeller, which provide superior durability and resistance to corrosion. This construction not only extends the lifespan of the pump but also enhances its efficiency during operation. The pump is capable of lifting water from depths of up to 25 feet, making it an effective solution for a range of applications.

The WP15-225 also includes a user-friendly design with ergonomic handles for easy transportation, coupled with a lightweight frame that makes it convenient to move around job sites. The integrated transport kit allows users to maneuver the pump effortlessly, delivering convenience on the go.

Furthermore, the pump features a durable, large-capacity fuel tank that ensures extended operation between refueling, minimizing downtime for the user. Its adjustable discharge feature allows for versatile operation, accommodating different discharge hose sizes and lengths, which is particularly useful for varying project requirements.

Safety features are not overlooked; the pump includes a low-oil shutdown mechanism that protects the engine from damage, ensuring longevity and reliable performance. The design has been tailored to minimize vibration, resulting in reduced user fatigue during extended use.

In summary, the Briggs & Stratton 073004 WP15-225 is a reliable, high-performing water pump that combines powerful engineering with user-friendly features. With its robust construction, efficient pumping capability, and thoughtful design elements, it stands out as a top choice for anyone in need of an effective solution for water management tasks. Whether it's for residential or commercial use, the WP15-225 is built to meet the demands of any dewatering challenge.
Top Page Image Contents