6. Timer
<Checking the Current Auto Off Timer Setting>
¢∞ Timer Setting
TIMER
AFTER | OFF |
AUTO OFF ¡
1.Be sure that the “Auto Off” is visible on the screen (at ¡).
2.Hold down the Timer Menu button w for 3 seconds, so that “Monitor” is indicated on the screen (at ¢).
• The timer remaining to shutdown appears at ∞.
3.To close the monitor and return to the standard control screen, press the Mode (Return) button 2.
<To Turn Off the Auto Off Timer...>
●Hold down the Timer On/Off button 9 for 3 seconds, so that “Timer Off” appears (at §) and the timer value (at ¶) disappears.
| ¶ |
| ˚F |
§ | ˚F |
AUTO OFF |
●Alternatively, turn off the air conditioner itself. The timer value (at ¶) will disappear from the screen.
¶
AUTO OFF
<To Turn On the Auto Off Timer...>
●Hold down the Timer On/Off button 9 for 3 seconds. The “Timer Off” indication disappears (at §), and the timer setting comes on the display (at ¶).
●Alternatively, turn on the air conditioner. The timer value will appear at ¶.
¶
| AFTER | OFF |
| ˚F | ˚F |
§ |
| |
| AUTO OFF |
6.2. For wireless remote controller
A
13
2
1 Press the AUTO STOP or AUTO START button (TIMER SET).
•Time can be set while the following symbol is blinking. OFF timer: A 
is blinking.
ON timer: A 
is blinking.
2 Use the | h | min |
and | buttons to set the desired time. |
3Canceling the timer.
To cancel the OFF timer, press the 
button.
To cancel the ON timer, press the AUTO START button.
•It is possible to combine both OFF and ON timers.
•Pressing the 1 ON/OFF button of the remote controller during timer mode to stop the unit will cancel the timers.
•If the current time has not been set, the timer operation cannot be used.
7. Other Functions
7.1. Locking the Remote Controller Buttons (Operation function limit controller)
■If you wish, you can lock the remote controller buttons. You can use the Function Selection of remote controller to select which type of lock to use. (For information about selecting the lock type, see section 8, item
Specifically, you can use either of the following two lock types.
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The “Locked” indicator appears on the screen to indicate that buttons are cur-
<How to Lock the Buttons>
1.While holding down the Filter button 4, press and hold down the ON/OFF button 1 for 2 seconds. The “Locked” indication appears on the screen (at ¡), indicating that the lock is now engaged.
*If locking has been disabled in Function Selection of remote controller, the screen will display the “Not Available” message when you press the buttons as described above.
¡
FUNCTION
˚F
˚F
•If you press a locked button, the “Locked” indication (at ¡) will blink on the display.
rently locked.
TIME SUN
FUNCTION
˚F
˚F
| TEMP. |
|
| ON/OFF |
| MENU | ON/OFF |
| FILTER |
BACK | MONITOR/SET | DAY |
| CHECK TEST |
CLOCK | OPERATION | CLEAR | ||
¡
Lock Indicator
1
4
¡
FUNCTION
˚F
˚F
<How to Unlock the Buttons>
1.While holding down the Filter button 4, press and hold down the ON/ OFF button 1for 2
¡
˚F
˚F
11