Mitsubishi Electronics PKA-AGA, PCA-AGA, PLA-AAA Timer, Ventillation, For Wired Remote-controller

5. Operation

<To Change the Right/Left Air Direction>

■Press the louver button 7 as necessary.

•The louver image ¶ appears.

Each press of the button switches the setting as follows.

	No display	During swing operation, the arrow dis-
	(Stop)
		play move to the left and right.
(ON)	(OFF)

5.6. Ventillation

sFor LOSSNAY combination

5.6.1.For Wired Remote-controller

●To run the ventilator together with the indoor unit:

■Press the ON/OFF button 1.

•The Vent indication appears on the screen (at •). The ventilator will now automatically operate whenever the indoor unit is running.

●To run the ventilator independently:

■Press the Mode button 2 until appears on the display. This will cause the ventilator to start.

●To change the ventilator force:

■Press the Ventilation button 8 as necessary.

• Each press toggles the setting, as shown below.

▲

▲

LowHigh

5.6.2. For Wireless Remote-controller

●The ventillator will automatically operate when the indoor unit turns on.

●No indication on the wireless remote controller.

6. Timer

6.1. For Wired Remote-controller

You can use Function Selection of remote controller to select which of three types of timer to use: 1Weekly timer, 2 Simple timer, or 3 Auto Off timer.

6.1.1. Weekly Timer

■The weekly timer can be used to set up to eight operations for each day of the week.

•Each operation may consist of any of the following: ON/OFF time together with a temperature setting, or ON/OFF time only, or tempera- ture setting only.

•When the current time reaches a time set at this timer, the air conditioner carries out the action set by the timer.

■Time setting resolution for this timer is 1 minute.

Note:

*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same time.

*2. The weekly timer will not operate when any of the following conditions is in effect.

The timer feature is off; the system is in an malfunction state; a test run is in progress; the remote controller is undergoing self-check or remote con- troller check; the user is in the process of setting a function; the user is in the process of setting the timer; the user is in the process of setting the current day of the week or time; the system is under central control. (Spe- cifically, the system will not carry out operations (unit on, unit off, or tem- perature setting) that are prohibited during these conditions.)

Operation No.

¢	™	£ Day Setting
		SUN
			ON
			˚F			¡
				WEEKLY
	TEMP.			ON/OFF		3
						1
						w
	MENU	ON/OFF		FILTER		4
BACK	MONITOR/SET	DAY		CHECK	TEST	0
PAR-21MAA	CLOCK		OPERATION
				CLEAR
2	q	9	78

<How to Set the Weekly Timer>

1.Be sure that you are at a standard control screen, and that the weekly timer indicator ¡ is shown in the display.

2.Press the Timer Menu button w, so that the “Set Up” appears on the screen (at ™). (Note that each press of the button toggles the display between “Set Up” and “Monitor”.)

3.Press the Timer On/Off (Set Day) button 9 to set the day. Each press

advances the display at £to the next setting, in the following sequence: “Sun Mon Tues Wed Thurs Fri Sat” → “Sun” → ... → “Fri” → “Sat” → “Sun Mon Tues Wed Thurs Fri Sat”...

4.Press the or Operation button (7or 8) as necessary to select the appropriate operation number (1 to 8) ¢.

*Your inputs at Steps 3 and 4 will select one of the cells from the matrix illustrated below.

(The remote-controller display at left shows how the display would appear when setting Operation 1 for Sunday to the values indicated below.)

Setup Matrix

Op No.	Sunday	Monday		…	Saturday
No. 1	• 8:30
	• ON
	• 73 °F
No. 2	• 10:00	• 10:00		• 10:00	• 10:00
	• OFF	• OFF		• OFF	• OFF
…
No. 8
	▲				▲
<Operation 1 settings for Sunday>			<Operation 2 settings for every day>
Start the air conditioner at 8:30, with			Turn off the air conditioner at 10:00.
the temperature set to 73 °F.

Note:

By setting the day to “Sun Mon Tues Wed Thurs Fri Sat”, you can set the same operation to be carried out at the same time every day.

(Example: Operation 2 above, which is the same for all days of the week.)

<Setting the Weekly Timer>
Shows the time	∞	§ Shows the selected operation (ON or OFF)
setting		* Does not appear if operation is not set.
	SUN
		ON
	˚F		¶	Shows the temperature setting
		WEEKLY		* Does not appear if temperature is not
				set.

5.Press the appropriate Set Time button q as necessary to set the desired time (at ∞).

*As you hold the button down, the time first increments in minute inter- vals, then in ten-minute intervals, and then in one-hour intervals.

6.Press the ON/OFF button 1 to select the desired operation (ON or OFF), at §.

*Each press changes the next setting, in the following sequence:

No display (no setting) → “ON” → “OFF”

8