2. Parts Names
■Wired Remote-Controller
Display Section
“Sensor” indication
For purposes of this explanation, all parts of the display are shown as lit. During actual operation, only the relevant items will be lit.
Identifies the current operation
Shows the operating mode, etc.
*Multilanguage display is sup- ported.
“CentrallyControlled”indicator
Indicates that operation of the re- mote controller has been prohib- ited by a master controller.
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto Off timer is set.
If the simple or Auto Off timer is set, shows the time remaining.
TIME SUN MON TUE WED THU FRI SAT | ||
TIMER | Hr | ON |
AFTER | AFTER | OFF |
ERROR CODE |
| FUNCTION |
˚F˚C |
| FILTER |
˚F˚C |
| |
| WEEKLY | |
ONLY1Hr. |
| SIMPLE |
| AUTO OFF | |
Displayed when the remote controller sensor is used.
“Locked” indicator
Indicates that remote controller but- tons have been locked.
“Clean The Filter” indicator
Comes on when it is time to clean the filter.
Timer indicators
The indicator comes on if the corre- sponding timer is set.
Fan Speed indicator
Shows the selected fan speed.
“Timer is Off” indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Up/Down Air Direction indica- tor
The indicator 
shows the direc- tion of the outcoming airflow.
“One Hour Only” indicator
Displayed if the airflow is set to weak and downward during COOL or DRY mode. (Operation varies according to model.)
The indicator goes off after one hour, at which time the airflow di- rection also changes.
Room Temperature display
Shows the room temperature. The room temperature display range is
Louver display
Indicates the action of the swing louver. Does not appear if the louver is station- ary.
(Power On indicator)
Indicates that the power is on.
Ventilation indicator
Appears when the unit is running in Ventilation mode.
Operation Section
Set Temperature buttons
Down
Up
Timer Menu button (Monitor/Set button)
Mode button (Return button)
Set Time buttons
Back
Ahead
Timer On/Off button (Set Day button)
Opening the door.
| TEMP. |
|
| MENU | ON/OFF |
BACK | MONITOR/SET | DAY |
CLOCK | ||
|
| ON/OFF button | |
|
| Fan Speed button | |
|
| Filter | button |
|
| (<Enter> button) | |
| ON/OFF | Test Run button | |
|
|
| |
|
| Check button (Clear button) | |
| FILTER |
| |
| CHECK | TEST |
|
OPERATION |
| Airflow Up/Down button | |
CLEAR |
|
| |
|
| Louver button | |
|
| ( | Operation button) |
|
|
| To preceding operation |
|
|
| number. |
Note:
|
|
| Ventilation button |
( | Operation button) | ||
To next operation number.
●“PLEASE WAIT” message
This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power failure.
●“NOT AVAILABLE” message
This message is displayed if a button is pressed to operate a function that the indoor unit does not have.
If a single remote controller is used to simultaneously operate multiple indoor units that are different models, this message will not be displayed if any of the indoor units is equipped with the function.
4