ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
(and Optional Electric or Gas Cooktop Combination)
If oven is used in a new branch circuit installation (1996 NEC), mobile home, recreational vehicle, or where local codes DO NOT permit grounding through the neutral (white) wire (see figure 4):
1.Disconnect the power supply.
2.Separate the green (or bare copper) and white appliance cable wires.
3.In the circuit breaker, fuse box or junction box: connect appliance and power supply cable wires as shown in Figure 4.
Cable from Power Supply | |
Ground Wire |
|
| White Wire |
Red |
|
Wires |
|
| Black |
Ground Wire | Wires |
| |
(Bare or Green |
|
Wire) | White Wire |
| |
Junction Box | |
| |
| Connector (or CSA listed) |
| Cable from appliance |
| Figure 4 |
DO NOT ground to a gas supply pipe. DO NOT connect to electrical power supply until appliance is permanently grounded. Connect the ground wire before turning on the power (Figure 4).
If connecting to a
NOTE TO ELECTRICIAN: The armored cable leads supplied with the appliance are
Heavy Weight Hazard
•Use 2 or more people to move and install wall oven.
•Failure to follow this instruction can result in injury or damage to the unit.
Model and Serial Number Location
The serial plate is located along the interior side trim of the oven and visible when the door is opened.
When ordering parts for or making inquires about your oven, always be sure to include the model and serial numbers and a lot number or letter from the serial plate on your oven.
Single Wall Oven
Serial Plate Location
Double Wall Oven
Serial Plate Location
5