ASSEMBLING YOUR BREVILLE Kitchen Wizz Pro™
Overload protection system
If the motor overloads, the food processor will go to STANDBY mode and OVERLOAD icon in the LCD starts to flash. The food processor can still be switched off by pressing the POWER/OFF button. To operate the food processor again, allow the machine to cool for approx 30 minutes.
Some stiff mixtures, such as dough, may cause the dough blade to rotate more slowly than normal. If this happens, do not process for longer than 1 minute.
If the blades or discs should jam while processing, ensure the POWER/OFF button is pressed to switch the motor off. Switch off the power outlet. Remove the processing lid and adjust any food wedged between the blade and the bowl or in the disc. Replace the lid and proceed as normal. If this occurs again, the processing bowl may be overloaded, so remove some of the food and process in smaller batches.
NOTE
The food processor is designed so the motor will not operate without the processing bowl and lid are correctly locked into position and the pusher inserted into the feed chute. In the event that the food processor starts without the lid correctly locked into position, immediately disconnect at the power outlet and return to your local Breville Service Centre for examination.
14