Breville BFP800 manual Problem Easy Solution Food processor, Shuts off during, Operation, Motor

PAgeTROUBLESHOOTINGheader.....

Problem	Easy Solution
The food processor	• The lid may have become unlocked; check to make sure it is
shuts off during	securely in position.
operation	• If the motor overloads, the 'OVERLOAD' icon in the LCD will
	start to flash. Switch off by pressing the POWER/OFF button
	and unplug the power cord. Allow the food processor to cool
	for 20–30 minutes before resuming.
The motor	• This is normal as some heavier loads may require the motor
slowed down	to work harder. Reposition the food in the feed chute and
during operation.	continue processing.
	• The maximum load capacity may have been exceeded.
	Remove some of the ingredients and continue processing.
The food processor	• Make sure the rubber feet at the bottom of the unit are clean
vibrates/moves	and dry. Also make sure that the maximum load capacity is
during processing	not being exceeded.
Dough doesn’t	• When kneading dough, always start the food processor
fully incorporate	before adding liquid. Add liquid in a slow, steady stream,
ingredients	allowing the dry ingredients to absorb it. If too much liquid
	is added, wait until ingredients in the processing bowl have
	mixed, then add remaining liquid slowly (do not turn off
	the machine). Pour liquid onto the dough as it passes under
	the feed chute opening; do not pour liquid directly onto the
	bottom of the processing bowl.
Dough feels tough	• Divide dough into 2 or 3 pieces and redistribute evenly in
after kneading	processing bowl. Process 10 seconds or until uniformly soft
	and pliable.
Dough is too dry	• While machine is running, add water through the small feed
	chute, 1 tablespoon at a time until dough cleans the inside of
	the processing bowl.
Dough is too wet	• While machine is running, add flour through the small feed
	chute, 1 tablespoon at a time until dough cleans the inside of
	the processing bowl.

39