KitchenAid UXI01200DYS, UXI0600DYS Make Electrical Power Supply Connection to Downdraft Vent

Page 21

7.Use UL listed wire connectors and connect the gray wires (G) together.

WARNING

Electrical Shock Hazard

Electrically ground blower.

Connect ground wire to green and yellow ground wire in terminal box.

Failure to do so can result in death or electrical shock.

8.Connect the green (or yellow/green) ground wire to the green/yellow ground wire (H) in the terminal box using UL listed wire connectors.

9.Reinstall the in-line blower terminal box cover and screw.

10.Reinstall the front cover of the in-line blower housing and secure it with 10 mounting screws.

Electrical Connection Inside Downdraft Vent Between In- line Blower System and Downdraft Vent

NOTE: Discard the 6-wire connector assembly supplied with the in-line blower motor system.

1.With the downdraft vent mounted, locate the bottom wiring cable (5 wires) inside the downdraft vent terminal box.

2.Connect the wires from the bottom wiring cable (5 wires) inside the downdraft vent terminal box to the wires from the in-line blower wiring conduit inside the downdraft vent terminal box.

3.Connect the same color wires to each other (black to black, white to white, etc.) using UL listed wire connectors.

NOTE: Connect the green (or green/yellow) ground wire from the wiring conduit to the green (or bare) ground wire from the home power supply using UL listed wire connectors (see the “Make Electrical Power Supply Connections to Downdraft Vent” section).

B

C

 

 

D

A

E

 

F

 

G

 

H

 

I

A. UL listed or CSA approved

F. Blue wires

¹⁄₂" (1.3 cm) wiring conduit

G. Gray wires

B. UL listed wire connectors

H. Green (or green/yellow)

C. Black wires

wire

D. White wires

I. Bottom wiring cable

E. Red wires

(5 wires)

4.Go to “Make Electrical Power Supply Connection to Downdraft Vent” section.

Make Electrical Power Supply Connection to

Downdraft Vent

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Disconnect power.

2.Locate the downdraft vent terminal box.

A

A. Terminal box

F C

B D

E

 

A

A. Green or green and yellow

D. Black wires

ground wires

E. UL listed or CSA approved

B. White wires

conduit connector

C. UL listed wire connectors

F. Downdraft vent wiring

3.Use UL listed wire connectors and connect black wires (D) together.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Retractable POP-UP Downdraft Vent System Table of Contents/Table des matièresTable DES Matières Table of ContentsYour safety and the safety of others are very important Vent System SafetyImportant Safety Instructions Installation Requirements Tools and PartsLocation Requirements Models with interior-mounted blower motor Product DimensionsCountertop Cutout Dimensions Cabinet DimensionsVenting Requirements Electrical RequirementsVenting Methods Installation Instructions INTERIOR-MOUNTED Vent MotorIsland Location Built-In Cabinet LocationsExample Vent System Calculating Vent System LengthDetermine Which Vent Direction Is Best for Your Installation Install Vent SystemBottom Venting Rear Mounting-Blower MotorLeft or Right Venting Front ViewRemove the screws from the wire mounting plate Complete Installation¹⁄₄ x 10 8.3 x 25.4 cm Back Draft Damper Cm Round Vent Transition with DamperTighten the lower support legs screws Remove 4 screws attaching the terminal box coverCheck Operation Make Electrical ConnectionsMaximum Length of Vent System Installation Instructions EXTERIOR-MOUNTED Vent MotorFront or Rear Venting Complete Installation Exterior-Mounted Motor Install Downdraft Vent In-Line External Type Blower MotorPrepare for Mounting the In-Line Blower System Drill 4 mounting pilot holes using a ³⁄₁₆ 4.8 mm drill bit Install In-line Blower System Outlet SidePrepare the In-line Blower System Inlet SideElectrical Connection Inside In-line Blower System Make Electrical Connections for In-Line Blower Motor SystemDisconnect power Locate the downdraft vent terminal box Make Electrical Power Supply Connection to Downdraft VentCheck Operation Vent System USE When Cooking Is CompleteOperating Downdraft Vent To UseVent System Care Surface of Downdraft VentFilters Interior-Mounted Blower Motor Wiring DiagramsExterior-Mounted Blower Motor SEL0016521Accessories Assistance or ServiceU.S.A CanadaThis limited warranty does not cover Kitchenaid Ventilation WarrantyVotre sécurité et celle des autres est très importante Sécurité DU Système DE VentilationImportantes Instructions DE Sécurité Exigences Dinstallation Exigences demplacementOutils et pièces Modèles à ventilateur monté à lintérieur Dimensions du produitRemarques Dimensions du placardTableau des dimensions de l’ouverture du plan de travail Plan de travail Dimensions des ouvertures à découperInstallations dans les régions au climat froid Longueur recommandée pour le système d’extractionSpécifications électriques Exigences concernant l’évacuationConfiguration en îlot Instructions D’INSTALLATION Ventilateur Monté À L’INTÉRIEURMéthodes d’évacuation Calcul de la longueur effective du circuit d’évacuationExemple de circuit d’évacuation Installation du conduit d’évacuationRectangulaire de 3¹⁄₄ x Composant Cm x 25,4 cmÉvacuation par le bas Sortie par le côté gauche ou le côté droit Montage du ventilateur à l’arrièreVue de face Vue arrièreClapet anti-retour de 3¹⁄₄ x 10 8,3 x 25,4 cm Achever l’installationRaccord de transition rond de 6 15,2 cm avec clapet Retirer les vis de la platine de montage du câbleÔter les 4 vis du couvercle du boîtier de connexion Raccordements électriquesSerrer les vis des pieds de soutien Déconnecter la source de courant électriqueContrôle du fonctionnement AvertissementConfiguration avec encastrement Instructions D’INSTALLATION Ventilateur Monté À L’EXTÉRIEURConfiguration en îlot- Évacuation par l’avant Configuration en îlot- Évacuation par l’arrièreÉvacuation par l’avant ou par l’arrière Préparation du montage du système de ventilation en ligne Achever l’installation Ventilateur monté à l’extérieurPréparation du système de ventilation en ligne Installation du système de ventilation en ligneCôté sortie Côté entréeDe conduit de ¹⁄₂ 1,3 cm homologués UL ou CSA Installer les connecteurs de conduit et le conduit dans lesConduit de câblage de ¹⁄₂ 1,3 cm entre le logement du Suffisamment de conduit de câblage de ¹⁄₂ 1,3 cm pourConduit de câblage ¹⁄₂ 1,3 cm Homologation UL Par le bas Utilisation du système d’extraction par le bas Utilisation DU Système D’EXTRACTIONUtilisation Lorsque la cuisson est terminéeSurface du système d’extraction par le bas Entretien DU Système D’ÉVACUATIONVentilateur monté à lintérieur Schéma DE CâblageVentilateur monté à lextérieur SEL0016521Accessoires Assistance OU ServiceAux États-Unis Au CanadaGarantie DU Système DE Ventilation Kitchenaid La présente garantie limitée ne couvre pasComposer le 1-800-422-1230. Au Canada, composer le W10342489E

UXI01200DYS, UXI0600DYS specifications

The KitchenAid UXI0600DYS and UXI01200DYS are two innovative under-cabinet range hoods designed to enhance kitchen functionality while adding a touch of elegance. These range hoods provide homeowners with the ideal balance of performance and style, making them popular choices for modern kitchens.

The UXI0600DYS, with its sleek design and powerful performance, is a 36-inch hood that offers a maximum airflow of 600 CFM to efficiently eliminate smoke, odors, and moisture from the cooking area. Its three-speed fan allows users to select the appropriate level of ventilation based on cooking needs, ensuring a comfortable environment. The convenience of a dishwasher-safe filter simplifies maintenance, allowing for easy cleaning and longevity of the unit.

On the other hand, the UXI01200DYS is designed for smaller spaces, offering a compact 30-inch option that does not compromise on performance. With a maximum airflow of 300 CFM and a two-speed fan, it provides adequate ventilation for everyday cooking tasks. Its stainless steel finish complements a variety of kitchen styles, providing a seamless addition to any decor.

Both models incorporate advanced noise-reduction technology, ensuring that the operation of the fan remains quiet, allowing for conversation and enjoyment during cooking. The easy-to-use control panel features sleek push button controls, making it simple to operate even while preparing meals.

Each range hood is equipped with LED lighting, enhancing visibility over the cooking surface. This not only provides a practical solution but also contributes to the overall ambiance of the kitchen. The illumination helps home chefs keep an eye on their dishes while adding a modern touch to the space.

Installation versatility is another noteworthy characteristic, as both range hoods can be mounted under cabinets, optimizing kitchen space without compromising functionality. The UXI0600DYS and UXI01200DYS are ideal for homeowners seeking effective ventilation solutions that blend performance with an attractive design.

In summary, the KitchenAid UXI0600DYS and UXI01200DYS range hoods are excellent choices for any kitchen, providing powerful ventilation, quiet operation, easy maintenance, and stylish design, thus fulfilling the diverse needs of home chefs.
Top Page Image Contents