Frymaster KSCF18G manual Fryer Troubleshooting, Pressed

KSCF18G COOL ZONE SERIES GAS FRYERS

CHAPTER 7: TROUBLESHOOTING

7.2 Fryer Troubleshooting

	Computer fails to turn ON	1.	Check	wall	circuit breakers. Reset, if
7.2.1	when ON/OFF button is		necessary.
	pressed.	2.	Check fryer connection to external
			power source.
		3.	Disconnect fryer from power supply.
		4.	Check fuses and replace, if necessary
			(see photo at left).
		5.	Power	surge/outage			may	have
			temporarily locked out computer.
Fuses are located inside the cabinet,		If the fryer still fails to turn ON when the
		ON/OFF		button		is pressed,	contact an
under the component box.		authorized service agent.
		1.	Ensure float-switch is not stuck in
			"down" position. Contact an authorized
			service technician for service if float-
7.2.2	Computer is ON, but the		switch is defective.
		2.	If computer			displays HELP,		reset
	gas valves fail to energize.
			high-limit thermostat (located in the
			fryer cabinet under the control panel).
			Contact an authorized service technician
			for service if high-limit will not reset.
		1.	Turn fryer ON.
		2.	Select a product number and allow the
			fryer to heat for approximately 30
			minutes		to	stabilize	shortening
			temperature at desired setpoint.
7.2.3	Actual frypot temperature	3.	Place a thermometer within 1 inch (25
	differs from the computer		mm) of the temperature probe (see
	setpoint temperature.		illustration, Page 7-3).
		4.	Press the computer temperature button
			to check frypot temperature. Press the
			computer temperature button twice to
			view setpoint temperature for the
			product number chosen.

7-2