Position | Frymaster 8196203 manual

2.On dual-vat fryers, and on full-vat fryers where the temperature probe is attached to the element being replaced, disconnect the wire harness containing the probe wiring. Using a pin pusher, disconnect the probe wires from the 12-pin connector C-6.

3.In the rear of the fryer directly behind the frypot disconnect the 6-pin connector for the left element (as viewed from the front of the fryer) or the 9-pin connector for the right element. Press in on the tabs on each side of the connector while pulling outward on the free end to extend the connector and release the element leads (see photo below). Pull the leads out of the connector and out of the wire sleeving.

Note: Liquid resistant seals.

4.Raise the element to the full up position and support the elements.

5.Remove the hex head screws and nuts that secure the element to the tube assembly and pull the element out of the frypot. NOTE: Full-vat elements consist of two dual-vat elements clamped together. For full-vat units, remove the element clamps before removing the nuts and screws that secure the element to the tube assembly.

6.If applicable, recover the probe bracket and probe from the element being replaced and install them on the replacement element, then install the replacement element in the frypot, securing it with the nuts and screws removed in Step 5 to the tube assembly ensuring the gasket is between the tube and element assembly.

7.Route the element leads through the element tube assembly and into the wire sleeving to prevent chafing. Ensure that the wire sleeving is routed back through the Heyco bushing keeping it clear from the lift springs. Also ensure that the wire sleeving extends into the tube assembly to protect the edge of the tube assembly from chafing the wires. Press the pins into the connector in accordance with the diagram below, and then close the connector to lock the leads in place. NOTE: It is critical that the wires be routed through the sleeving to prevent chafing.

					Index Marker marks
					Position 1
							3	2	1
	3	2	1				6	5	4
	6	5	4				9	8	7
6L	5L	4L	3L 2L	1L	6	5	4R	3R	2	1R
					R	R			R

7-5

8196203 specifications

The Frymaster 8196203 is a highly regarded commercial fryer that has carved a niche in the fast-paced environment of restaurants and food service operations. This unit combines advanced technology with robust design, making it an ideal choice for those who demand efficiency and consistency in their frying processes.

One of the standout features of the Frymaster 8196203 is its high-capacity frying system. With the ability to handle large batches, this fryer is perfect for busy kitchens that require quick service without sacrificing food quality. The unit is engineered to provide optimal heating, ensuring that oil is quickly brought to the desired frying temperature, reducing wait times and improving overall productivity.

The Frymaster 8196203 is equipped with a powerful heating system that utilizes innovative technologies for enhanced performance. It often includes options for both gas and electric heating, catering to the specific needs of various kitchen environments. The unit's design promotes even heat distribution, reducing the risk of uneven cooking and guaranteeing that every piece of food is crisped to perfection.

Furthermore, the fryer features a sophisticated filtration system that helps maintain oil quality. This system automatically filters out food particles and other impurities, extending the life of the cooking oil and ensuring that the flavor of the food remains untainted. As a result, operators can save on oil costs while also ensuring food quality stays high.

Safety is another important aspect of the Frymaster 8196203, which includes built-in features such as temperature controls and safety shut-off mechanisms. These features help prevent overheating and accidents, allowing kitchen staff to focus on cooking rather than constantly monitoring the fryer.

The Frymaster 8196203 is designed with user-friendliness in mind. Its intuitive control panel allows for easy adjustments and monitoring, ensuring that cooks can operate it with minimal training. Additionally, the fryer is constructed with durable materials that are easy to clean, which is essential for maintaining hygiene in any food service environment.

In conclusion, the Frymaster 8196203 is a reliable commercial fryer that stands out for its high capacity, advanced heating technology, and efficiency-enhancing features. With a focus on safety, ease of use, and maintenance, it’s a valuable addition to any kitchen, helping chefs produce mouth-watering fried dishes with speed and consistency.

Position 1

8196203 specifications