When CD, AUX, VIDEO 1~2 is selected as an input source
4. Select the digital or analog input connected as desired.
ENGLISH
•Each time this button is pressed, the corresponding input is selected as follows:
→A(nalog) → o(ptical) 1 → o(ptical) 2 c(oaxial) 2 ← c(oaxial) 1 ←
■Notes :
•When TUNER, TAPE, EXTERNAL IN or VIDEO 3 is selected as an input source, the analog input is selected automatically.
•When the selected digital input is not connected, the "DIGITAL" indicator flickers and the analog input is automatically selected.
•The selected digital or analog input is automatically assigned to the corresponding input source on the INPUT setup menu. (For details, refer to "SETTING THE INPUT" on page 39.)
•The sound from the component connected to the selected digital input can be heard regardless of the selected input source.
5.Operate the selected component for playback.
•When playing back the program sources with surround sound, refer to "ENJOYING SURROUND SOUND" on page 20.
6.Adjust the (overall) volume.
7. To mute the sound.
•"MUTE" will flicker.
•To resume the previous sound level, press it again.
8. To listen with the headphones.
•Ensure that the SPEAKER button is set to off.
•Depending on the signal format which is being input, you can listen in different Dolby Headphone modes, stereo mode, etc. (For details, refer to "Listening in a Dolby Headphone mode" on page 21).
•When the EXTERNAL IN is selected as an input source, only front left and front right channel signals can be reproduced through the headphones.
16