XM Satellite Radio R-672 manual When selecting the Dolby Plii Music

Page 51

R-672(A) 2007.6.15 10:17 AM 페이지 51

Continued

When selecting the DOLBY PLII MUSIC

• You can adjust the various surround parameters for optimum surround effect.

■Note: The parameter settings are valid only when listening in either Dolby Pro Logic II Music mode or the Dolby Pro Logic IIx Music mode.

1. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the “PLII MSC”, then press the ENTER button.

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired parameter.

• Each time the CURSOR UP(▲)/DOWN(▼) buttons are pressed, “PANO” (Panorama), “C.WIDTH” (Center width) or “DIMEN” (Dimension) is selected.

3. Press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to adjust the selected parameter as desired.

■When selecting the “PANO” (Panorama) mode

This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging. Select "OFF" or "ON"(default value:OFF).

■When selecting the “C. WIDTH” (Center width) control

This adjusts the center image so it may be heard only from the center speaker, only from the left/right speakers as a phantom image, or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7(default value : 3).

■When selecting the “DIMEN” (Dimension) control

This gradually adjusts the soundfield either towards the front or towards the rear. The control can be set in 7 steps from -3 to +3(default value : 0).

4. Repeat the above steps 2 and 3 to adjust other parameters.

ENGLISH

51

Image 51

Contents CoverA2007.6.15957AM페이지 Safety Instructions Read this Before Operating Your Unit IntroductionContents System Connections Connecting AntennasHDMIHigh Definition Multimedia Interface connection Connecting Video ComponentsConnecting Audio Components Connecting External INS Connecting Digital INS and OUTDigital input default settings Surround back speakers Connecting Subwoofer PRE OUTConnecting XM only for North America Connecting SpeakersAC Input Cord Switched AC OutletsFluorescent Display Front Panel ControlsSetup MIC Jack AUX in JackVideo 3 in Jacks Remote Controls Loading Batteries Remote Control Operation RangeWhen selecting the External in as desired OperationsBefore operation Operate the selected component for playback When CD, AUX, Video 1~2 is selected as an input sourceAdjusting the tone bass and treble Surround Sound Dolby Pro Logic Dolby Pro Logic IIx surroundDolby Pro Logic II surround Dolby Virtual SpeakerEnjoying Surround Sound Signal format being input Selectable surround mode2CH downmix mode To cancel the surround mode for stereo operationDolby Virtual Speaker Parameters Dolby Pro Logic II/Dolby Pro Logic IIx Music ParametersDolby Headphone Parameters Adjusting each channel level with test toneAdjusting the current channel level Recalling the memorized channel levels Memorizing the adjusted channel levelsListening to Radio Broadcasts Auto tuningManual tuning Auto presettingScanning preset stations in sequence Manual presettingMemory Backup Function Tuning to preset stationsSigning up for XM Satellite Radio XM Satellite Radio only for North AmericaChannel search Direct searchCategory search Displaying XM information Presetting channels Preset searchSignal strength display mode Error message and statusDubbing from video components onto Video Dubbing the audio and video signals separately onto VideoRecording Recording with TapeOptical Digital OUT Digital Audio Recording with MD RecorderDisplaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsNavigating through the setup menu System SetupSetup menu flow English Setting the System When selecting the AMP AssignWhen selecting the Subwoofer mode When selecting the Cinema EQ When selecting the ToneWhen selecting the Digital Setting the InputWhen selecting the AV Sync When selecting the Video ModeWhen selecting the Auto Surround When selecting the RemasterWhen selecting the Auto Setup Setting the Speaker SetupPreparations About the first listening positionEnglish When setting the speaker size by performing the auto setup When selecting the Speaker ConfigurationAbout the speaker size When selecting the Speaker DistanceWhen selecting the desired unit When setting the distanceAbout the crossover frequency When selecting the Speaker CrossoverWhen selecting the Room EQ Adjusting the current channel level Setting the CH LevelRecalling the memorized channel levels When selecting the Night Mode Setting the Sound ParameterWhen selecting the Dimen Dimension control When selecting the Dolby Plii MusicWhen selecting the Pano Panorama mode When selecting the C. Width Center width controlWhen selecting the Dolby Headphone When selecting the Dolby Virtual Speaker When selecting the REF Dolby Virtual Speaker Reference modeWhen selecting the Wide Dolby Virtual Speaker Wide mode Problem Possible Cause Remedy Troubleshooting GuideAmplifier Section SpecificationsCoverA2007.6.15957AM페이지