AEG 64800 manual Delay start pushbutton

Page 10

10

Water tap

Flashes when:

-The water tap is closed.

-The mains supply has been cut off.

-The inlet hose may be blocked.

Open door

Flashes when the door has not been properly closed.

9. "Delay start" pushbutton

Allows the start of the programme to be delayed by a minimum of 1 hour, up to 12 hours.

Audible signals have been introduced to help indicate which operations the dishwasher is performing.

"Instruction accepted" audible signal

When any of the pushbuttons are pressed, an audible signal informs you that the machine has accepted the instruction given.

"Programme run" audible signal

An audible signal informs you that the washing programme is starting.

"End of programme" audible signal

An intermittent audible signal informs you that the wash programme has ended.

"Alarm" audible signal

The machine is fitted with a number of alarm systems to help you determine the cause of any problems (see "What to do, if...").

An audible signal informs you that an alarm is activated.

Image 10

Contents Ökofavorit Dear customer Please read these user instructions carefullyContents Before using your dishwasher for the first time Safety instructionsUsing your dishwasher for its intended purpose Child safetyYour dishwasher in day-to-day use Disposing of the packaging Disable the door lock so that the door no longer closesDisposing of packaging and old machine Disposing of your old machineEconomical and ecological dishwashing Description of the appliance Inside of the applianceDoor handle Digital display Small load pushbutton Programme phase indicator lightsIndicator lights SaltDelay start pushbutton SO280 Before using your dishwasher for the first time Setting the water hardness rangeTo set a different level, proceed as follows Filling with special salt To fillFilling up the rinse-aid Rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Removable knife basket Lower basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket If using detergent in tablets proceed as follows Use of detergentBIO programmes and compact powders Washing programmes Approximate values Cycle descriptionOperating instructions 8a. Set and start the programme without delay start Setting of the programme may occur8b. Set and start the programme with delay start To cancel a programme At the end of the washing programmePage Internal and external cleaning Maintenance and cleaningCleaning the filters Together Flashing fault code appears What to do, whenWash results are not satisfactory Problems occur during use of the dishwasherDishes are not clean Visible lime deposits or white film on the dishesCustomer service Hints for test centres Technical data Technical specificationsFitting under a counter Installation and connection instructionsAdjusting the worktop LevellingConnecting the water supply Water outlet connection Extension hoses Water protection system Electrical connectionCopyright by AEG 152985 56/1