AEG 64800 Rinse-aid, Filling up the rinse-aid, Ensure that the lid is closed after every refill

Page 15

Important: The salt refill indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuring the dishwasher remains on. If you are using salts that take longer to dissolve then this can take longer. The function of the dishwasher is not affected.

The rinse-aid

The rinse-aid ensures brilliant crockery and also helps it to dry. It is automatically dosed in during the hot rinsing cycle. The storage compartment built in to the in side of the door can hold about 110 ml of rinse-aid, which will be sufficient for between 16 and 40 dishwashing programmes, according to the dosage setting.

Filling up the rinse-aid

1.Open the container by turning the lid (A) anticlockwise.

2.Add the rinse aid until the container is completely full. The indicator (B) will be completely dark.

Ensure that the lid is closed after every refill.

Top up with rinse aid when the rinse aid indicator light on the control panel illuminates.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

Attention! Do not put liquid detergent in the rinse aid department.

A

BR01

B
	x	6	5	4	3
	x				3
m	a				2
m					1
					1
BR03

15

Image 15

Contents Ökofavorit Please read these user instructions carefully Dear customerContents Child safety Safety instructionsUsing your dishwasher for its intended purpose Before using your dishwasher for the first timeYour dishwasher in day-to-day use Disposing of your old machine Disable the door lock so that the door no longer closesDisposing of packaging and old machine Disposing of the packagingEconomical and ecological dishwashing Inside of the appliance Description of the applianceSalt Programme phase indicator lightsIndicator lights Door handle Digital display Small load pushbuttonDelay start pushbutton SO280 Setting the water hardness range Before using your dishwasher for the first timeTo set a different level, proceed as follows To fill Filling with special saltRinse-aid Filling up the rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Lower basket Removable knife basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket Use of detergent If using detergent in tablets proceed as followsBIO programmes and compact powders Washing programmes Cycle description Approximate valuesOperating instructions Setting of the programme may occur 8a. Set and start the programme without delay start8b. Set and start the programme with delay start At the end of the washing programme To cancel a programmePage Maintenance and cleaning Internal and external cleaningCleaning the filters Together What to do, when Flashing fault code appearsVisible lime deposits or white film on the dishes Problems occur during use of the dishwasherDishes are not clean Wash results are not satisfactoryCustomer service Hints for test centres Technical specifications Technical dataLevelling Installation and connection instructionsAdjusting the worktop Fitting under a counterConnecting the water supply Water outlet connection Extension hoses Electrical connection Water protection systemCopyright by AEG 152985 56/1