AEG 64800 manual 8b. Set and start the programme with delay start

Page 28

28

8b. Set and start the programme with "delay start"

●Select the wash programme by simply pressing one of the programme pushbuttons, the display will show the running time of the programme in minutes and the indicator lights of the phases corresponding to the programme will illuminate.

●If necessary select the "small load" by pressing the corresponding pushbutton (in this case the running time of the programme will be adequated).

With the selection of the programmes "Quick 50°C" and "Rinse and Hold" the small load option is not available.

●Press the "delay start" pushbutton, in the display appears h1. Select the time by pressing repeatedly the "delay start" pushbutton until the required number of hours appear in the display. You can delay the start of a programme up to a maximum of 12 hours (h12).

To cancel the setting of the delay start press the pushbutton until the running time of the selected programme reappears in the display.

●If the setting of the programme has been made with the door opened:

close the door and the dishwasher starts the countdown automatically after 5 seconds. The number of hours to go before the programme starts appears in the display and decreases from hour to hour. The letter h flashing in the display indicates that the delay start is active.

●If the setting of the programme has been made with the door closed:

the dishwasher will start the countdown automatically after 5 seconds from the last pressure of a pushbutton.

●Once the delay set has elapsed the programme will start automatically, the indicator lights of the phases turn off except for the light of the phase under way. The displayed time will start to decrease from minute to minute.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Ökofavorit Dear customer Please read these user instructions carefullyContents Safety instructions Using your dishwasher for its intended purposeBefore using your dishwasher for the first time Child safetyYour dishwasher in day-to-day use Disable the door lock so that the door no longer closes Disposing of packaging and old machineDisposing of the packaging Disposing of your old machineEconomical and ecological dishwashing Description of the appliance Inside of the applianceProgramme phase indicator lights Indicator lightsDoor handle Digital display Small load pushbutton SaltDelay start pushbutton SO280 Before using your dishwasher for the first time Setting the water hardness rangeTo set a different level, proceed as follows Filling with special salt To fillFilling up the rinse-aid Rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Removable knife basket Lower basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket If using detergent in tablets proceed as follows Use of detergentBIO programmes and compact powders Washing programmes Approximate values Cycle descriptionOperating instructions 8a. Set and start the programme without delay start Setting of the programme may occur8b. Set and start the programme with delay start To cancel a programme At the end of the washing programmePage Internal and external cleaning Maintenance and cleaningCleaning the filters Together Flashing fault code appears What to do, whenProblems occur during use of the dishwasher Dishes are not cleanWash results are not satisfactory Visible lime deposits or white film on the dishesCustomer service Hints for test centres Technical data Technical specificationsInstallation and connection instructions Adjusting the worktopFitting under a counter LevellingConnecting the water supply Water outlet connection Extension hoses Water protection system Electrical connectionCopyright by AEG 152985 56/1
Top Page Image Contents