AEG 64800 8a. Set and start the programme without delay start, Setting of the programme may occur

Page 27

The setting of the programme may occur:

With open door, in this case the selected programme and eventual options (small load and/or delay start) will start automatically 5 seconds after the closure of the door.

With closed door, in this case the selected programme and eventual options (small load and/or delay start) will start automatically 5 seconds after the last pressure of a pushbutton.

8a. Set and start the programme without "delay start"

●Select the wash programme by simply pressing one of the programme pushbuttons, the display will show the running time of the programme in minutes and the indicator lights of the phases corresponding to the programme will illuminate.

●If necessary select the "small load" by pressing the corresponding pushbutton (in this case the running time of the programme will be adequated).

With the selection of the programmes "Quick 50°C" and "Rinse and Hold" the small load option is not available.

●If the setting of the programme has been made with the door opened:

close the door and the programme will start automatically after 5 seconds. Until the door remains open you still have the possibility to modify the setting made.

●If the setting of the programme has been made with the door closed:

the programme will start automatically after 5 seconds from the last pressure of a pushbutton.

●The starting of the programme will be confirmed by an audible signal, the indicator lights of the phases turn off except for the light of the phase under way. The displayed time will start to decrease from minute to minute.

27

Image 27

Contents Ökofavorit Please read these user instructions carefully Dear customerContents Child safety Safety instructionsUsing your dishwasher for its intended purpose Before using your dishwasher for the first timeYour dishwasher in day-to-day use Disposing of your old machine Disable the door lock so that the door no longer closesDisposing of packaging and old machine Disposing of the packagingEconomical and ecological dishwashing Inside of the appliance Description of the applianceSalt Programme phase indicator lightsIndicator lights Door handle Digital display Small load pushbuttonDelay start pushbutton SO280 Setting the water hardness range Before using your dishwasher for the first timeTo set a different level, proceed as follows To fill Filling with special saltRinse-aid Filling up the rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Lower basket Removable knife basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket Use of detergent If using detergent in tablets proceed as followsBIO programmes and compact powders Washing programmes Cycle description Approximate valuesOperating instructions Setting of the programme may occur 8a. Set and start the programme without delay start8b. Set and start the programme with delay start At the end of the washing programme To cancel a programmePage Maintenance and cleaning Internal and external cleaningCleaning the filters Together What to do, when Flashing fault code appearsVisible lime deposits or white film on the dishes Problems occur during use of the dishwasherDishes are not clean Wash results are not satisfactoryCustomer service Hints for test centres Technical specifications Technical dataLevelling Installation and connection instructionsAdjusting the worktop Fitting under a counterConnecting the water supply Water outlet connection Extension hoses Electrical connection Water protection systemCopyright by AEG 152985 56/1